Torrent Search

forum.utorrent.com

µTorrent Community

You are not logged in.

Pages: 1 2 3 … 13 Next

#1 2006-05-31 14:11:40

Firon
Administrator

UPnP in 1.6 not working for you? Post here

Okay, everyone keep all this UPnP stuff to one thread.

Post the EXACT messages from the Logger, and if you can access the XML file from your browser, please save it and upload it somewhere, then link here. If you can't do that, then paste it here into a code box. Failing that, e-mail me the XML file, along with the Logger messages. firon@utorrent.com

Big note before reporting anything:
MAKE SURE DMZ IS NOT TURNED ON FOR YOU. MAKE SURE THE PORT IS NOT ALREADY FORWARDED!
And make sure your router actually SUPPORTS UPnP, and that UPnP is turned on. If you ONLY see Unable to map UPnP Port in the Logger, this may be the case.

Last edited by Firon (2006-07-01 15:12:24)

Offline

#2 2006-05-31 14:44:10

BruCiore
Member

Re: UPnP in 1.6 not working for you? Post here

As I said before here's the log :

Connecting to http://192.168.1.254/upnp/IGD.xml
Didn't find any XML information!
Unable to map UPnP Port.

and here's the XML file:

http://bruciore.sky.prohosting.com/IGD.xml

Last edited by BruCiore (2006-05-31 14:46:17)

Offline

#3 2006-05-31 17:23:21

stickyboot
Member

Re: UPnP in 1.6 not working for you? Post here

I get this when I start 462

[18:19:26]  Connecting to http://192.168.1.1:5678/rootDesc.xml

[18:19:26]  0: urn:schemas-upnp-org:service:WANIPConnection:1

[18:19:26]  1: http://192.168.1.1:2468//WANIPConnection

[18:19:26]  2: /WANIPConnection

[18:19:26]  3: /WANIPCn.xml

[18:19:26]  4: 

[18:19:26]  5: http://192.168.1.1:5678

[18:19:26]  UPnP: Discovered new device: http://192.168.1.1:2468//WANIPConnection
[18:19:26]  <?xml version="1.0"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><SOAP-ENV:Body><m:GetGenericPortMappingEntryResponse xmlns:m="urn:schemas-upnp-org:service:WANIPConnection:1"><NewRemoteHost xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:dt="string"></NewRemoteHost><NewExternalPort xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:dt="ui2">21</NewExternalPort><NewProtocol xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:dt="string">TCP</NewProtocol><NewInternalPort xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:dt="ui2">21</NewInternalPort><NewInternalClient xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:dt="string">192.168.1.0</NewInternalClient><NewEnabled xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:dt="boolean">0</NewEnabled><NewPortMappingDescription xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:dt="string">FTP</NewPortMappingDescription><NewLeaseDuration xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:dt="ui4">0</NewLeaseDuration></m:GetGenericPortMappingEntryResponse></SOAP-ENV:Body></SOAP-ENV:Envelope>


[18:19:29]  <?xml version="1.0"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><SOAP-ENV:Body><m:AddPortMappingResponse xmlns:m="urn:schemas-upnp-org:service:WANIPConnection:1"/></SOAP-ENV:Body></SOAP-ENV:Envelope>


[18:19:29]  UPnP: ERROR -1 mapping port 28249 -> 192.168.1.100:28249
[18:19:40]  Unable to map UPnP Port.

Even though it says it cant map the port, the port is forwarded when I log into the UPnP Section under network connections.  I have a BEFSR11 running firmware 1.45.7, Jul 31 2003

WHATS IN THE XML FILE:

- <html>
  <head /> 
- <body>
- <root>
- <specversion>
  <major>1</major> 
  <minor>0</minor> 
  </specversion>
  <urlbase>http://192.168.1.1:5678</urlbase> 
- <device>
  <devicetype>urn:schemas-upnp-org:device:InternetGatewayDevice:1</devicetype> 
  <presentationurl>/index.htm</presentationurl> 
  <friendlyname>Linksys BEFSR41/BEFSR11/BEFSRU31</friendlyname> 
  <manufacturer>Linksys Inc.</manufacturer> 
  <manufacturerurl>http://www.linksys.com</manufacturerurl> 
  <modeldescription>Internet Access Server</modeldescription> 
  <modelname>Linksys BEFSR41/BEFSR11/BEFSRU31</modelname> 
  <udn>uuid:upnp-InternetGatewayDevice-1_0-0090a2777777</udn> 
  <upc>00000-00001</upc> 
- <iconlist>
- <icon>
  <mimetype>image/gif</mimetype> 
  <width>16</width> 
  <height>16</height> 
  <depth>8</depth> 
  <url>http://192.168.1.1/calc.gif</url> 
  </icon>
  </iconlist>
- <servicelist>
- <service>
  <servicetype>urn:schemas-upnp-org:service:Layer3Forwarding:1</servicetype> 
  <serviceid>urn:upnp-org:serviceId:L3Forwarding1</serviceid> 
  <controlurl>/Layer3Forwarding</controlurl> 
  <eventsuburl>/Layer3Forwarding</eventsuburl> 
  <scpdurl>/Layer3Forwarding.xml</scpdurl> 
  </service>
  </servicelist>
- <devicelist>
- <device>
  <devicetype>urn:schemas-upnp-org:device:WANDevice:1</devicetype> 
  <friendlyname>WANDevice</friendlyname> 
  <manufacturer>Linksys Inc.</manufacturer> 
  <manufacturerurl>http://www.linksys.com</manufacturerurl> 
  <modeldescription>BROADBAND ROUTER</modeldescription> 
  <modelname>Linksys BEFSR41/BEFSR11/BEFSRU31</modelname> 
  <modelnumber>1</modelnumber> 
  <modelurl>http://www.linksys.com</modelurl> 
  <serialnumber>0000001</serialnumber> 
  <udn>uuid:upnp-WANDevice-1_0-0090a2777777</udn> 
  <upc>00000-00001</upc> 
- <servicelist>
- <service>
  <servicetype>urn:schemas-upnp-org:service:WANCommonInterfaceConfig:1</servicetype> 
  <serviceid>urn:upnp-org:serviceId:WANCommonInterfaceConfig</serviceid> 
  <controlurl>http://192.168.1.1:6688/WANCommonInterfaceConfig</controlurl> 
  <eventsuburl>/WANCommonInterfaceConfig</eventsuburl> 
  <scpdurl>/WANCfg.xml</scpdurl> 
  </service>
  </servicelist>
- <devicelist>
- <device>
  <devicetype>urn:schemas-upnp-org:device:WANConnectionDevice:1</devicetype> 
  <friendlyname>Internet Access Server</friendlyname> 
  <manufacturer>Linksys Inc.</manufacturer> 
  <manufacturerurl>http://www.linksys.com</manufacturerurl> 
  <modeldescription>BROADBAND ROUTER</modeldescription> 
  <modelname>Linksys BEFSR41/BEFSR11/BEFSRU31</modelname> 
  <modelnumber>1</modelnumber> 
  <modelurl>http://www.linksys.com</modelurl> 
  <serialnumber>0000001</serialnumber> 
  <udn>uuid:upnp-WANConnectionDevice-1_0-0090a2777777</udn> 
  <upc>00000-00001</upc> 
- <servicelist>
- <service>
  <servicetype>urn:schemas-upnp-org:service:WANIPConnection:1</servicetype> 
  <serviceid>urn:upnp-org:serviceId:WANIPConnection</serviceid> 
  <controlurl>http://192.168.1.1:2468//WANIPConnection</controlurl> 
  <eventsuburl>/WANIPConnection</eventsuburl> 
  <scpdurl>/WANIPCn.xml</scpdurl> 
  </service>
  </servicelist>
  </device>
  </devicelist>
  </device>
  </devicelist>
  </device>
  </root>
  </body>
  </html>

LINK TO XML FILE
(IT MIGHT SAY 404 BUT JUST MANUALLY COPY AND PASTE THE URL AGAIN AND IT WILL LOAD)

Last edited by stickyboot (2006-05-31 18:26:25)

Offline

#4 2006-05-31 17:26:24

osmosis
Member

Re: UPnP in 1.6 not working for you? Post here

yes yes, i know it's a crappy router, but this is what i'm stuck with - DI-524 - and here's my error:

[22:22:43]  Connecting to http://192.168.0.1:5678/igd.xml
[22:22:45]  0: urn:schemas-upnp-org:service:WANIPConnection:1
[22:22:45]  1: /WANIPConnection
[22:22:45]  2: /WANIPConnection
[22:22:45]  3: /WANIPConnection.xml
[22:22:45]  4: 
[22:22:45]  5: http://192.168.0.1:5678
[22:22:45]  UPnP: Discovered new device: http://192.168.0.1:5678/WANIPConnection
[22:22:46]  <?xml version="1.0"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><SOAP-ENV:Body>
<m:GetGenericPortMappingEntryResponse xmlns:m="urn:schemas-upnp-org:service:WANIPConnection:1"><NewRemoteHost xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:dt="string"></NewRemoteHost><NewExternalPort xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:dt="ui2">8579</NewExternalPort><NewProtocol xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:dt="string">UDP</NewProtocol><NewInternalPort xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:dt="ui2">8579</NewInternalPort><NewInternalClient xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:dt="string">192.168.0.102</NewInternalClient><NewEnabled xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:dt="boolean">1</NewEnabled><NewPortMappingDescription xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:dt="string">BitComet (192.168.0.102:8579) 8579</NewPortMappingDescription><NewLeaseDuration xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:dt="ui4">0</NewLeaseDuration></m:GetGenericPortMappingEntryResponse></SOAP-ENV:Body> </SOAP-ENV:Envelope>
[22:22:47]  <?xml version="1.0"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><SOAP-ENV:Body>
<m:AddPortMappingResponse xmlns:m="urn:schemas-upnp-org:service:WANIPConnection:1"></m:AddPortMappingResponse></SOAP-ENV:Body> </SOAP-ENV:Envelope>
[22:22:47]  UPnP: ERROR -1 mapping port 49251 -> 192.168.0.100:49251
[22:22:57]  Unable to map UPnP Port.

and here's that igd.xml file:

<?xml version="1.0" ?> 
- <root xmlns="urn:schemas-upnp-org:device-1-0">
- <specVersion>
  <major>1</major> 
  <minor>0</minor> 
  </specVersion>
  <URLBase>http://192.168.0.1:5678</URLBase> 
- <device>
  <deviceType>urn:schemas-upnp-org:device:InternetGatewayDevice:1</deviceType> 
  <presentationURL>http://192.168.0.1:80</presentationURL> 
  <friendlyName>D-Link Router</friendlyName> 
  <manufacturer>D-Link</manufacturer> 
  <manufacturerURL>http://www.dlink.com</manufacturerURL> 
  <modelDescription>Internet Access Router</modelDescription> 
  <modelName>D-Link Router</modelName> 
  <UDN>uuid:upnp-InternetGatewayDevice-1_0-12345678900001</UDN> 
  <UPC>123456789001</UPC> 
- <serviceList>
- <service>
  <serviceType>urn:schemas-upnp-org:service:Layer3Forwarding:1</serviceType> 
  <serviceId>urn:upnp-org:serviceId:L3Forwarding1</serviceId> 
  <controlURL>/Layer3Forwarding</controlURL> 
  <eventSubURL>/Layer3Forwarding</eventSubURL> 
  <SCPDURL>/Layer3Forwarding.xml</SCPDURL> 
  </service>
  </serviceList>
- <deviceList>
- <device>
  <deviceType>urn:schemas-upnp-org:device:WANDevice:1</deviceType> 
  <friendlyName>WANDevice</friendlyName> 
  <manufacturer>D-Link</manufacturer> 
  <manufacturerURL>http://www.dlink.com</manufacturerURL> 
  <modelDescription>Internet Access Router</modelDescription> 
  <modelName>D-Link Router</modelName> 
  <modelNumber>1</modelNumber> 
  <modelURL>http://support.dlink.com</modelURL> 
  <serialNumber>12345678900001</serialNumber> 
  <UDN>uuid:upnp-WANDevice-1_0-12345678900001</UDN> 
  <UPC>123456789001</UPC> 
- <serviceList>
- <service>
  <serviceType>urn:schemas-upnp-org:service:WANCommonInterfaceConfig:1</serviceType> 
  <serviceId>urn:upnp-org:serviceId:WANCommonInterfaceConfig</serviceId> 
  <controlURL>/WANCommonInterfaceConfig</controlURL> 
  <eventSubURL>/WANCommonInterfaceConfig</eventSubURL> 
  <SCPDURL>/WANCommonInterfaceConfig.xml</SCPDURL> 
  </service>
  </serviceList>
- <deviceList>
- <device>
  <deviceType>urn:schemas-upnp-org:device:WANConnectionDevice:1</deviceType> 
  <friendlyName>WAN Connection Device</friendlyName> 
  <manufacturer>D-Link</manufacturer> 
  <manufacturerURL>http://www.dlink.com</manufacturerURL> 
  <modelDescription>Internet Access Router</modelDescription> 
  <modelName>D-Link Router</modelName> 
  <modelNumber>1</modelNumber> 
  <modelURL>http://support.dlink.com</modelURL> 
  <serialNumber>12345678900001</serialNumber> 
  <UDN>uuid:upnp-WANConnectionDevice-1_0-12345678900001</UDN> 
  <UPC>123456789001</UPC> 
- <serviceList>
- <service>
  <serviceType>urn:schemas-upnp-org:service:WANIPConnection:1</serviceType> 
  <serviceId>urn:upnp-org:serviceId:WANIPConnection</serviceId> 
  <controlURL>/WANIPConnection</controlURL> 
  <eventSubURL>/WANIPConnection</eventSubURL> 
  <SCPDURL>/WANIPConnection.xml</SCPDURL> 
  </service>
  </serviceList>
  </device>
  </deviceList>
  </device>
  </deviceList>
  </device>
  </root>

a yes, i forgot to mention that i'm running firmware 1.21 and i have hardware revision A2.

Last edited by osmosis (2006-06-01 10:51:50)

Offline

#5 2006-05-31 18:01:39

stickyboot
Member

Re: UPnP in 1.6 not working for you? Post here

At least I know I'm not the only one now big_smile

Offline

#6 2006-05-31 19:05:04

scott21
Member

Re: UPnP in 1.6 not working for you? Post here

same thing here too.. w/ linksys bsfr41 1.46.02 firmware

Offline

#7 2006-05-31 19:16:12

atm999
Member

Re: UPnP in 1.6 not working for you? Post here

[21:24:42]  Didn't find any XML information!

[21:34:43]  Connecting to http://192.168.1.***:****/cameradesc.xml

[21:34:45]  Connecting to http://192.168.1.***:****/IGatewayDeviceDescDoc

[21:34:45]  0: urn:schemas-upnp-org:service:WANIPConnection:1

[21:34:45]  1: /WANIPConnCtrlUrl

[21:34:45]  2: /WANIPConnEvtUrl

[21:34:45]  3: /WanIPConnectionDescDoc

[21:34:45]  4: 

[21:34:45]  5: 

[21:34:45]  <s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body>
<u:GetGenericPortMappingEntryResponse  xmlns:u="urn:schemas-upnp-org:service:WANIPConnection:1">
<NewRemoteHost></NewRemoteHost>
<NewExternalPort>50000</NewExternalPort>
<NewProtocol>TCP</NewProtocol>
<NewInternalPort>50000</NewInternalPort>
<NewInternalClient>192.168.1.***</NewInternalClient>
<NewEnabled>1</NewEnabled>
<NewPortMappingDescription>IPCamera(192.168.1.***: Ex:50000 In:50000)</NewPortMappingDescription>
<NewLeaseDuration>0</NewLeaseDuration>
</u:GetGenericPortMappingEntryResponse>
</s:Body></s:Envelope>



[21:34:45]  <s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body>
<u:GetGenericPortMappingEntryResponse  xmlns:u="urn:schemas-upnp-org:service:WANIPConnection:1">
<NewRemoteHost></NewRemoteHost>
<NewExternalPort>44567</NewExternalPort>
<NewProtocol>TCP</NewProtocol>
<NewInternalPort>44567</NewInternalPort>
<NewInternalClient>192.168.1.***</NewInternalClient>
<NewEnabled>1</NewEnabled>
<NewPortMappingDescription>utorrent</NewPortMappingDescription>
<NewLeaseDuration>0</NewLeaseDuration>
</u:GetGenericPortMappingEntryResponse>
</s:Body></s:Envelope>



[21:34:45]  <s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body><s:Fault><faultcode>s:Client</faultcode><faultstring>UPnPError</faultstring><detail><UPnPError xmlns="urn:schemas-upnp-org:control-1-0"><errorCode>713</errorCode><errorDescription>
SpecifiedArrayIndexInvalid</errorDescription></UPnPError></detail></s:Fault></s:Body></s:Envelope>

Last edited by atm999 (2006-05-31 19:17:03)

Offline

#8 2006-05-31 19:57:48

Firon
Administrator

Re: UPnP in 1.6 not working for you? Post here

And um, you don't need to censor the IP. It's a local IP, no one outside your network can access it.


Also, big note before reporting anything:
MAKE SURE DMZ IS NOT TURNED ON FOR YOU. MAKE SURE THE PORT IS NOT ALREADY FORWARDED!

Offline

#9 2006-05-31 20:17:01

rafi
Member

Re: UPnP in 1.6 not working for you? Post here

http://forum.utorrent.com/viewtopic.php … 35#p184235

<?xml version="1.0" ?> 
- <root xmlns="urn:schemas-upnp-org:device-1-0">
- <specVersion>
  <major>1</major> 
  <minor>0</minor> 
  </specVersion>
  <URLBase>http://192.168.2.138</URLBase> 
- <device>
  <deviceType>urn:schemas-upnp-org:device:InternetGatewayDevice:1</deviceType> 
  <friendlyName>SpeedTouch 510 (0404FGKC2)</friendlyName> 
  <manufacturer>THOMSON</manufacturer> 
  <manufacturerURL>http://www.thomson.net</manufacturerURL> 
  <modelDescription>DSL Internet Gateway Device</modelDescription> 
  <modelName>SpeedTouch</modelName> 
  <modelNumber>510</modelNumber> 
  <modelURL>http://www.speedtouch.com</modelURL> 
  <serialNumber>0404FGKC2</serialNumber> 
  <UDN>uuid:UPnP-SpeedTouch510-1_00-90-D0-CC-51-42</UDN> 
  <presentationURL>/</presentationURL> 
- <serviceList>
- <service>
  <serviceType>urn:schemas-upnp-org:service:Layer3Forwarding:1</serviceType> 
  <serviceId>urn:upnp-org:serviceId:layer3f</serviceId> 
  <controlURL>/upnp/control/layer3f</controlURL> 
  <eventSubURL>/upnp/event/layer3f</eventSubURL> 
  <SCPDURL>/upnp/Layer3Forwarding.xml</SCPDURL> 
  </service>
  </serviceList>
- <deviceList>
- <device>
  <deviceType>urn:schemas-upnp-org:device:LANDevice:1</deviceType> 
  <friendlyName>LANDevice</friendlyName> 
  <manufacturer>THOMSON</manufacturer> 
  <modelName>SpeedTouch</modelName> 
  <serialNumber>0404FGKC2</serialNumber> 
  <UDN>uuid:UPnP-SpeedTouch510-1_00-90-D0-CC-51-42_LD</UDN> 
- <serviceList>
- <service>
  <serviceType>urn:schemas-upnp-org:service:LANHostConfigManagement:1</serviceType> 
  <serviceId>urn:upnp-org:serviceId:lanhcm</serviceId> 
  <controlURL>/upnp/control/lanhcm</controlURL> 
  <eventSubURL>/upnp/event/lanhcm</eventSubURL> 
  <SCPDURL>/upnp/LANHostConfigManagement.xml</SCPDURL> 
  </service>
  </serviceList>
  </device>
- <device>
  <deviceType>urn:schemas-upnp-org:device:WANDevice:1</deviceType> 
  <friendlyName>WANDevice</friendlyName> 
  <manufacturer>THOMSON</manufacturer> 
  <modelName>SpeedTouch</modelName> 
  <serialNumber>0404FGKC2</serialNumber> 
  <UDN>uuid:UPnP-SpeedTouch510-1_00-90-D0-CC-51-42_WD</UDN> 
- <serviceList>
- <service>
  <serviceType>urn:schemas-upnp-org:service:WANCommonInterfaceConfig:1</serviceType> 
  <serviceId>urn:upnp-org:serviceId:wancic</serviceId> 
  <controlURL>/upnp/control/wancic</controlURL> 
  <eventSubURL>/upnp/event/wancic</eventSubURL> 
  <SCPDURL>/upnp/WANCommonInterfaceConfig.xml</SCPDURL> 
  </service>
  </serviceList>
- <deviceList>
- <device>
  <deviceType>urn:schemas-upnp-org:device:WANConnectionDevice:1</deviceType> 
  <friendlyName>WANConnectionDevice</friendlyName> 
  <manufacturer>THOMSON</manufacturer> 
  <modelName>SpeedTouch</modelName> 
  <serialNumber>0404FGKC2</serialNumber> 
  <UDN>uuid:UPnP-SpeedTouch510-1_00-90-D0-CC-51-42_WCDRELAY</UDN> 
- <serviceList>
- <service>
  <serviceType>urn:schemas-upnp-org:service:WANDSLLinkConfig:1</serviceType> 
  <serviceId>urn:upnp-org:serviceId:wandsllc:RELAY</serviceId> 
  <controlURL>/upnp/control/wandsllcRELAY</controlURL> 
  <eventSubURL>/upnp/event/wandsllcRELAY</eventSubURL> 
  <SCPDURL>/upnp/WANDSLLinkConfig.xml</SCPDURL> 
  </service>
- <service>
  <serviceType>urn:schemas-upnp-org:service:WANPPPConnection:1</serviceType> 
  <serviceId>urn:upnp-org:serviceId:wanpppc:Internet</serviceId> 
  <controlURL>/upnp/control/wanpppcInternet</controlURL> 
  <eventSubURL>/upnp/event/wanpppcInternet</eventSubURL> 
  <SCPDURL>/upnp/WANPPPConnection.xml</SCPDURL> 
  </service>
  </serviceList>
  </device>
  </deviceList>
  </device>
  </deviceList>
  </device>
  </root>

maybe after solving these uPnP problems, ludde will know enough on XML to  go ahead with the RSS parsing problems... tongue

Last edited by rafi (2006-05-31 20:23:48)

My uTorrent v2.0.x Migration/upgrade Tips - http://forum.utorrent.com/viewtopic.php?id=74820
v2.0.4 > download . <

Offline

#10 2006-05-31 20:33:53

gilmour
Member

Re: UPnP in 1.6 not working for you? Post here

Same prob here, was working fine with beta 460

Connecting to [ ]http://192.168.1.254:2800/InternetGatewayDevice.xml
Didn't find any XML information!
Unable to map UPnP Port

Modem is a Billion BiPAC 743GE

Will post XML when I get home

Last edited by gilmour (2006-05-31 20:38:13)

Offline

#11 2006-06-01 03:33:52

rafi
Member

Re: UPnP in 1.6 not working for you? Post here

When doing "disable" to the upnp feature - the log displays - "unable to map port" ...

I suppose something might not be  correct in the disable operation-sequesce...

My uTorrent v2.0.x Migration/upgrade Tips - http://forum.utorrent.com/viewtopic.php?id=74820
v2.0.4 > download . <

Offline

#12 2006-06-01 04:00:37

Switeck
Moderator

Re: UPnP in 1.6 not working for you? Post here

Also on Win 98SE and using an older Linksys 4-port wired router -- and getting the same message:
the log displays - "unable to map port"

1st:Have you tried Ultima's Troubleshooting Guide?: http://forum.utorrent.com/viewtopic.php?id=15992
2nd:Recommended uTorrent settings: http://forum.utorrent.com/viewtopic.php?id=58404
3rd:ISP throttling and possible workarounds: http://forum.utorrent.com/viewtopic.php?id=58714
4th:Sequential downloading DESTROYS torrents!: http://forum.utorrent.com/viewtopic.php?id=29726

Offline

#13 2006-06-01 09:58:20

edimax
Member

Re: UPnP in 1.6 not working for you? Post here

[20:27:15]  Unable to map UPnP Port.

I have an EDiMAX-6104P router, i'm not DMZ'ed, nor port forwarded

This is the only message i get from Logger

Offline

#14 2006-06-01 13:07:19

Firon
Administrator

Re: UPnP in 1.6 not working for you? Post here

Also, make sure your router actually SUPPORTS UPnP. tongue

Offline

#15 2006-06-01 20:05:54

rafi
Member

Re: UPnP in 1.6 not working for you? Post here

On some routers (like mine - Alcatel 510) you have to enabled uPnP. Firon, I suggest you note this in your first message.

BTW - can you tell from the log messages if it was enabled or not , inaccessible, or XML parsing problem ?

Last edited by rafi (2006-06-02 11:45:29)

My uTorrent v2.0.x Migration/upgrade Tips - http://forum.utorrent.com/viewtopic.php?id=74820
v2.0.4 > download . <

Offline

#16 2006-06-01 20:17:22

Firon
Administrator

Re: UPnP in 1.6 not working for you? Post here

The router won't advertise the XML file if UPnP is turned off, afaik.
You'll simply see [00:18:16]  Unable to map UPnP Port, I believe.

Offline

#17 2006-06-01 20:30:09

rafi
Member

Re: UPnP in 1.6 not working for you? Post here

hmmm...  right, it does so  here... so why not write it clearly in the text so users will know to enable it (or define the gateway properly) and not just come here and post it as a uT  problem  ? ...

Last edited by rafi (2006-06-01 20:47:40)

My uTorrent v2.0.x Migration/upgrade Tips - http://forum.utorrent.com/viewtopic.php?id=74820
v2.0.4 > download . <

Offline

#18 2006-06-01 20:44:04

Ultima
Administrator

Re: UPnP in 1.6 not working for you? Post here

lol that sounds like my router... oh well, port forwarding working anyway xD

[size=0.85][ Tweaking Checklist | User Manual | BEE | MiniUI | µTA ][/size]

Offline

#19 2006-06-02 11:43:27

majikthise
Member

Re: UPnP in 1.6 not working for you? Post here

the nonpaged pool problem is still there..

Offline

#20 2006-06-02 13:30:43

bedrock
Member

Re: UPnP in 1.6 not working for you? Post here

Speedtouch 716v5 WL

[22:24:40]  Connecting to http://192.168.1.254:80/upnp/IGD.xml
[22:24:40]  Didn't find any XML information!
[22:24:51]  Unable to map UPnP Port.

XML file is browsable in webbrowser as follows

<root>
−
    <specVersion>
<major>1</major>
<minor>0</minor>
</specVersion>
<URLBase>http://192.168.1.254:80</URLBase>
−
    <device>
−
    <deviceType>
urn:schemas-upnp-org:device:InternetGatewayDevice:1
</deviceType>
<friendlyName>SpeedTouch 716 (0528JTGZ6)</friendlyName>
<manufacturer>THOMSON</manufacturer>
<manufacturerURL>http://www.thomson.net</manufacturerURL>
<modelDescription>DSL Voice Gateway Device</modelDescription>
<modelName>SpeedTouch</modelName>
<modelNumber>716v5</modelNumber>
<modelURL>http://www.speedtouch.com</modelURL>
<serialNumber>0528JTGZ6</serialNumber>
<UDN>uuid:UPnP_SpeedTouch716v5-1_00-14-7F-01-BB-50</UDN>
<presentationURL>/</presentationURL>
−
    <serviceList>
−
    <service>
<serviceType>urn:schemas-upnp-org:service:Layer3Forwarding:1</serviceType>
<serviceId>urn:upnp-org:serviceId:layer3f</serviceId>
<controlURL>/upnp/control/igd/layer3f</controlURL>
<eventSubURL>/upnp/event/igd/layer3f</eventSubURL>
<SCPDURL>/upnp/Layer3Forwarding.xml</SCPDURL>
</service>
</serviceList>
−
    <deviceList>
−
    <device>
<deviceType>urn:schemas-upnp-org:device:WANDevice:1</deviceType>
<friendlyName>WANDevice</friendlyName>
<manufacturer>THOMSON</manufacturer>
<modelName>SpeedTouch</modelName>
<serialNumber>0528JTGZ6</serialNumber>
<UDN>uuid:UPnP_SpeedTouch716v5-1_00-14-7F-01-BB-50_WD</UDN>
−
    <serviceList>
−
    <service>
−
    <serviceType>
urn:schemas-upnp-org:service:WANCommonInterfaceConfig:1
</serviceType>
<serviceId>urn:upnp-org:serviceId:wancic</serviceId>
<controlURL>/upnp/control/igd/wancic</controlURL>
<eventSubURL>/upnp/event/igd/wancic</eventSubURL>
<SCPDURL>/upnp/WANCommonInterfaceConfig.xml</SCPDURL>
</service>
</serviceList>
−
    <deviceList>
−
    <device>
<deviceType>urn:schemas-upnp-org:device:WANConnectionDevice:1</deviceType>
<friendlyName>WANConnectionDevice</friendlyName>
<manufacturer>THOMSON</manufacturer>
<modelName>SpeedTouch</modelName>
<serialNumber>0528JTGZ6</serialNumber>
−
    <UDN>
uuid:UPnP_SpeedTouch716v5-1_00-14-7F-01-BB-50_WCDatm_Internet
</UDN>
−
    <serviceList>
−
    <service>
<serviceType>urn:schemas-upnp-org:service:WANDSLLinkConfig:1</serviceType>
<serviceId>urn:upnp-org:serviceId:wandsllc:atm_Internet</serviceId>
<controlURL>/upnp/control/igd/wandsllcatm_Internet</controlURL>
<eventSubURL>/upnp/event/igd/wandsllcatm_Internet</eventSubURL>
<SCPDURL>/upnp/WANDSLLinkConfig.xml</SCPDURL>
</service>
−
    <service>
<serviceType>urn:schemas-upnp-org:service:WANPPPConnection:1</serviceType>
<serviceId>urn:upnp-org:serviceId:wanpppc:Internet</serviceId>
<controlURL>/upnp/control/igd/wanpppcInternet</controlURL>
<eventSubURL>/upnp/event/igd/wanpppcInternet</eventSubURL>
<SCPDURL>/upnp/WANPPPConnection.xml</SCPDURL>
</service>
</serviceList>
</device>
</deviceList>
</device>
</deviceList>
</device>
</root>

Offline

#21 2006-06-02 17:22:49

XorCist
Member

Re: UPnP in 1.6 not working for you? Post here

Hi im new to utorrent, ive only been using it for a couple days, and its great...a huge change from azureus...everything seems to be working properly, except for this one error i keep getting.
It says
Connecting to http://192.168.0.1/devicedesc.xml
didn't find any Xml information!
it does it every 10 minutes.


the thing is...i dont have a router, and i dont use a firewall.
im hooked straight into my dsl modem. Its a Speedstream 5100

Offline

#22 2006-06-02 21:28:12

rafi
Member

Re: UPnP in 1.6 not working for you? Post here

in preferences->network - uncheck uPnP

My uTorrent v2.0.x Migration/upgrade Tips - http://forum.utorrent.com/viewtopic.php?id=74820
v2.0.4 > download . <

Offline

#23 2006-06-02 22:58:52

Firon
Administrator

Re: UPnP in 1.6 not working for you? Post here

Please post the actual XML file, in a codebox, or upload it somewhere.

Offline

#24 2006-06-02 23:01:34

MoJo
Member

Re: UPnP in 1.6 not working for you? Post here

Mine says that the port is forwarded but it really isn't as I end up getting a Red light at the bottom, when I usually get a green light when I manually forward my connection.

Routers XML file

-<root>
−<specVersion>
<major>1</major>
<minor>0</minor>
</specVersion>
−<device>
  −<deviceType>
urn:schemas-upnp-org:device:InternetGatewayDevice:1
  </deviceType>
<friendlyName>UNEX (DSL)</friendlyName>
<manufacturer>Unex Technology Corporation.</manufacturer>
<modelDescription>Internet Gateway Device for DSL</modelDescription>
<modelName>UNEX</modelName>
<modelNumber>12345XYZ001</modelNumber>
<serialNumber>00000222</serialNumber>
<UDN>uuid:5825F8BA-75D2-a1a2-BAA2-0FEA7BC5D05D</UDN>
<UPC/>
  −<serviceList>
    −<service>
<serviceType>urn:schemas-upnp-org:service:Layer3Forwarding:1</serviceType>
<serviceId>urn:upnp-org:serviceId:L3Forwarding1</serviceId>
<SCPDURL>/L3Fwd.xml</SCPDURL>
<controlURL>/UD/?0</controlURL>
<eventSubURL>/?0</eventSubURL>
    </service>
  </serviceList>
  −<deviceList>
    −<device>
<deviceType>urn:schemas-upnp-org:device:WANDevice:1</deviceType>
<friendlyName>WAN Device Sample</friendlyName>
<manufacturer>Allegro Software Development Corp</manufacturer>
<modelName>WAN Device</modelName>
<UDN>uuid:04BBE68A-A736-a1a2-ADA6-BB53E815220A</UDN>
<UPC/>
    −<serviceList>
      −<service>
        −<serviceType>
urn:schemas-upnp-org:service:WANCommonInterfaceConfig:1
        </serviceType>
<serviceId>urn:upnp-org:serviceId:WANCommonInterfaceConfig</serviceId>
<SCPDURL>/WanCommonIfc1.xml</SCPDURL>
<controlURL>/UD/?1</controlURL>
<eventSubURL>/?1</eventSubURL>
      </service>
    </serviceList>
   −<deviceList>
     −<device>
<deviceType>urn:schemas-upnp-org:device:WANConnectionDevice:1</deviceType>
<friendlyName>WAN Connection Device</friendlyName>
<manufacturer>Allegro Software Development Corp</manufacturer>
<modelName>WAN Connection Device</modelName>
<UDN>uuid:71338B9E-a1a5-41af-A755-A103507F5F50</UDN>
<UPC/>
        −<serviceList>
          −<service>
<serviceType>urn:schemas-upnp-org:service:WANDSLLinkConfig:1</serviceType>
<serviceId>urn:upnp-org:serviceId:WANDSLLinkC1</serviceId>
<SCPDURL>/WanLink.xml</SCPDURL>
<controlURL>/UD/?2</controlURL>
<eventSubURL>/?2</eventSubURL>
           </service>
         −<service>
<serviceType>urn:schemas-upnp-org:service:WANPPPConnection:1</serviceType>
<serviceId>urn:upnp-org:serviceId:WANPPPConn1</serviceId>
<SCPDURL>/WanPppConn.xml</SCPDURL>
<controlURL>/UD/?3</controlURL>
<eventSubURL>/?3</eventSubURL>
          </service>
        −<service>
<serviceType>urn:schemas-upnp-org:service:WANIPConnection:1</serviceType>
<serviceId>urn:upnp-org:serviceId:WANIPConnection</serviceId>
<SCPDURL>/WanIpConn.xml</SCPDURL>
<controlURL>/UD/?4</controlURL>
<eventSubURL>/?4</eventSubURL>
          </service>
       </serviceList>
    </device>
  </deviceList>
</device>
−<device>
<deviceType>urn:schemas-upnp-org:device:LANDevice:1</deviceType>
<friendlyName>Lan Device sample</friendlyName>
<manufacturer>Allegro Software Development Corp</manufacturer>
<modelName>Lan Device</modelName>
<UDN>uuid:DDC87800-1296-a1a5-96D4-D10C4E2174B1</UDN>
<UPC/>
  −<serviceList>
    −<service>
      −<serviceType>
urn:schemas-upnp-org:service:LANHostConfigManagement:1
      </serviceType>
<serviceId>urn:upnp-org:serviceId:LANHostCfg1</serviceId>
<SCPDURL>/LanHostCfgMgmt.xml</SCPDURL>
<controlURL>/UD/?5</controlURL>
<eventSubURL/>
    </service>
  </serviceList>
</device>
</deviceList>
<presentationURL>/</presentationURL>
</device>
</root>

uTorrent Log

[02:41:35]  Connecting to http://192.168.62.1:80/DeviceDescription.xml

[02:41:35]  0: urn:schemas-upnp-org:service:WANIPConnection:1

[02:41:35]  1: /UD/?4

[02:41:35]  2: /?4

[02:41:35]  3: /WanIpConn.xml

[02:41:35]  4: 

[02:41:35]  5: 

[02:41:35]  UPnP: Discovered new device: http://192.168.62.1:80/UD/?4
[02:41:35]  <s:Envelope
 xmlns:s="http://schemas.xmlsoap.org/soap/envelope/"
s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<s:Body>
<u:GetGenericPortMappingEntryResponse xmlns:u="urn:schemas-upnp-org:service:WANIPConnection:1">
 <NewRemoteHost></NewRemoteHost>
 <NewExternalPort>0</NewExternalPort>
 <NewProtocol></NewProtocol>
 <NewInternalPort>0</NewInternalPort>
 <NewInternalClient></NewInternalClient>
 <NewEnabled>0</NewEnabled>
 <NewPortMappingDescription></NewPortMappingDescription>
 <NewLeaseDuration>1835823983</NewLeaseDuration>
</u:GetGenericPortMappingEntryResponse>
</s:Body>
</s:Envelope>


[02:41:36]  <s:Envelope
 xmlns:s="http://schemas.xmlsoap.org/soap/envelope/"
s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<s:Body>
<u:AddPortMappingResponse xmlns:u="urn:schemas-upnp-org:service:WANIPConnection:1">
</u:AddPortMappingResponse>
</s:Body>
</s:Envelope>


[02:41:36]  UPnP: Mapped port 9155 -> 192.168.62.100:9155

The XML encoding for my Router is in UTF-8, but uTorrent seems to have an interpretation problem as it shows boxes in the Log, boxes which disappeared when I copied and pasted to Notepad. They look like this '[][]',but more like a complete box ... hope that helps.

EDIT: Made the Router XML syntax more readable as copy and pasting makes a lot lost in translation. You can download the XML file here as well.

Router XML

Last edited by MoJo (2006-06-02 23:18:36)

Offline

#25 2006-06-02 23:04:22

Firon
Administrator

Re: UPnP in 1.6 not working for you? Post here

Do you have a firewall?

Offline

Pages: 1 2 3 … 13 Next

Board footer

Powered by FluxBB

© 2010 BitTorrent, Inc. µTorrent is a trademark of BitTorrent, Inc.