Jump to content

Network test in Setup Guide doesn't work


emc

Recommended Posts

The same test, new µTorrent 3.3.1.30003, in my home still doesn't not work, but in my office testport works fine.

How is it possible?

I am able to accept incoming connections at both places.

fNiQgQM.png

Note: Network testport icon in Setup Guide overlaps a progress bar above (XP and 7).

Link to comment
Share on other sites

It was also tested with UPnP and NAT-PMP enabled and another unused port. Everytime I am connectable, instead of Setup Guide shows anything else. Tested on people - peers in swarm.

Two other users contacted me and asked me about same problem...

What is new URL adress of testport when older http://www.utorrent.com/testport?plain=1&port= is out? If you don't want to publish it, pm me.

EDIT:

I tested situation whem I am not connectable. UPnP disabled. My web test FAILED, µTorrent OK x_eek.gif

3E0nWUg.png

Link to comment
Share on other sites

Your system is screwed up... Go live in your office... :P

But in my office it doesn't work too. :P Only difference is inverted result.

In every situation at home FAILED, office OK. Doesn't matter whether I am connectable or not.

Please see pictures above again and more thoroughly.

You can try test another closed port (as not connectable) whether uT shows you OK or FAILED.

You can compare with http://www.utorrent.cz/nat/ or http://www.utorrent.cz/nat/?plain=1&port=

EDIT:

At home I have 2 PC, Win 7, problem on both.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...