You are not logged in.
Hello!
Today I have tried to discover all options from GetSettings on 1.8.2:
Out of any Tab:
- install_revision
Prefilled with build number. Can be changed thru SetSetting but I see no purpose for it, neither any effect.
Tab General:
- language
Changed thru Language combobox.
- check_assoc_on_start
Changed thru checkbox "Check association on startup".
- autostart
Changed thru checkbox "Start uTorrent on system startup".
- check_update
Changed thru checkbox "Check for updates automatically".
- check_update_beta
Changed thru checkbox "Update to beta versions".
- anoninfo
Changed thru checkbox "Send anonymous information when checking for updates".
- boss_key
Changed thru editbox "Boss-key". Dunno what the values are, maybe some keycodes.
- append_incomplete
Changed thru checkbox "Append .!ut to incomplete files".
- prealloc_space
Changed thru checkbox "Pre-allocate all files".
- sys.prevent_standby
Changed thru checkbox "Prevent standby if there are active torrents".
Notes on General tab:
Buttons "Associate with...", "Install IPv6", "Clear Private Data", have no effect on any setting of getSettings.
Tab UI Settings:
- confirm_when_deleting
Changed thru checkbox "Confirm when deleting torrents"
- confirm_remove_tracker
Changed thru checkbox "Confirm when deleting trackers"
- confirm_exit
Changed thru checkbox "Show confirmation dialog on exit"
- gui.alternate_color
Changed thru checkbox "Alternate list background color"
- gui.speed_in_title
Changed thru checkbox "Show current speed in the title bar"
- gui.limits_in_statusbar
Changed thru checkbox "Show speed limits in the status bar"
- close_to_tray
Changed thru checkbox "Close to tray"
- minimize_to_tray
Changed thru checkbox "Minimize to tray"
- tray.show
Changed thru checkbox "Always show tray icon"
- tray.single_click
Changed thru checkbox "Single click on tray icon to open"
- notify_complete
Changed thru checkbox "Show balloon notifications in tray"
- tray_activate
Changed thru checkbox "Always activate when clicked"
- torrents_start_stopped
Changed thru checkbox "Don't start the download automatically"
- activate_on_file
Changed thru checkbox "Activate the program window"
- show_add_dialog
Changed thru checkbox "Show a window that displays the files inside the torrent"
- gui.dblclick_seed
Changed thru combobox "For seeding torrents"
- gui.dblclick_dl
Changed thru combobox "For downloading torrents"
Notes on UI Settings tab:
Nothing, all of options were found.
Tab Directories:
- dir_active_download_flag
Changed thru checkbox "Put new downloads in:"
- always_show_add_dialog
Changed thru checkbox "Always show dialog on manual add"
- dir_active_download
Changed thru editbox of "Put new downloads in" check.
- dir_completed_download_flag
Changed thru checkbox "Move completed downloads to:"
- dir_add_label
Changed thru checkbox "Append the torrent's label"
- move_if_defdir
Changed thru checkbox "Only move from the default download directory"
- dir_completed_download
Changed thru editbox of "Move completed downloads to:" check.
- dir_torrent_files_flag
Changed thru checkbox "Store .torrents in:"
- dir_torrent_files
Changed thru editbox of "Store .torrents in:" check
- dir_completed_torrents_flag
Changed thru checkbox "Move .torrents for finished jobs to:"
- dir_completed_torrents
Changed thru editbox of "Move .torrents for finished jobs to:" check
- dir_autoload_flag
Changed thru checkbox "Automatically load .torrents from"
- dir_autoload_delete
Changed thru checkbox "Delete loaded .torrents"
- dir_autoload
Changed thru editbox of "Automatically load .torrents from:" check
Notes on Directories tab:
Nothing, all of options were found.
Tab Connection:
- bind_port
Changed thru editbox of "Port used for incoming connections:"
- upnp
Changed thru checkbox of "Enable UPnP port mapping"
- natpmp
Changed thru checkbox of "Enable NAT-PMP port mapping"
- disable_fw
Changed thru checkbox of "Add Windows Firewall exception"
- rand_port_on_start
Changed thru checkbox of "Randomize port each start"
- proxy.type
Changed thru combobox of "Type:"
- proxy.proxy
Changed thru editbox of "Proxy:"
- proxy.port
Changed thru editbox of "Port:"
- proxy.auth
Changed thru checkbox of "Authentication"
- proxy.resolve
Changed thru checkbox of "Resolve hostnames through proxy"
- proxy.p2p
Changed thru checkbox of "Use proxy server for peer-to-peer connections"
- proxy.username
Changed thru editbox of "Username:"
- proxy.password
Changed thru editbox of "Password:"
Notes on Connection tab:
Nothing, all of options were found.
Tab Bandwidth:
- ul_auto_throttle
Changed thru checkbox "Automatic" of Maximum Upload Rate
- max_ul_rate
Changed thru editbox "Maximum upload rate"
- max_ul_rate_seed_flag
Changed thru checkbox "Alternate upload rate when not downloading"
- max_ul_rate_seed
Changed thru editbox of "Alternate upload rate when not downloading"
- max_dl_rate
Changed thru editbox of "Maximum download rate"
- conns_globally
Changed thru editbox of "Global maximum number of connections"
- conns_per_torrent
Changed thru editbox of "Maximum number of connected peers per torrent"
- ul_slots_per_torrent
changed thru editbox of "Number of upload slots per torrent"
- extra_ulslots
Changed thru checkbox "Use additional upload slots if upload speed < 90%"
Notes on Bandwidth tab:
Nothing, all of options were found.
Tab BitTorrent:
- dht
Changed thru checkbox "Enable DHT Network"
- dht_per_torrent
Changed thru checkbox "Enable DHT for new torrents"
- lsd
Changed thru checkbox "Enable Local Peer Discovery"
- tracker_ip
Changed thru editbox "IP/Hostname to report to tracker:"
- enable_scrape
Changed thru checkbox "Ask tracker for scrape information"
- pex
Changed thru checkbox "Enable Peer Exchange"
- rate_limit_local_peers
Changed thru checkbox "Limit local peer bandwidth"
- encryption_allow_legacy
Changed thru checkbox "Allow incoming legacy connections"
- encryption_mode
Changed thru combobox "Outgoing:"
Notes on BitTorrent tab:
Nothing, all of options were found.
Tab Queueing:
- max_active_torrent
Changed thru editbox "Maximum number of active torrents (upload or download)"
- max_active_downloads
Changed thru editbox "Maximum number of active downloads"
- seed_ratio
Changed thru editbox "Ratio is <= :"
- seed_time
Changed thru editbox "<= (min)" (but convert to seconds)
- seeds_prioritized
Changed thru checkbox "Seeding tasks have higher priority than downloading tasks"
- seed_prio_limitul_flag
Changed thru checkbox "Limit the upload rate to (kB/s):"
- seed_prio_limitul
Changed thru editbox of "Limit the upload rate to (kB/s):"
Notes on Queueing tab:
Nothing, all of options were found.
Tab Scheduler:
- sched_enable
Changed thru checkbox "Enable Scheduler"
- sched_ul_rate
Changed thru editbox "Limited upload rate (kB/s)"
- sched_dl_rate
Changed thru editbox "Limited download rate (kB/s)"
- sched_dis_dht
Changed thru checkbox "Disable DHT when turning off"
Notes on Scheduler tab:
The Scheduler Table is not acessible within WebUI.
Tab WebUI:
- webui.enable
Changed thru checkbox "Enable Web UI"
- webui.enable_guest
Changed thru checkbox "Enable guest account with username:"
- webui.guest
Changed thru editbox of "Enable guest account with username:"
- webui.enable_listen
Changed thru checkbox "Alternative listening port"
- webui.username
Changed thru editbox "Username:"
- webui.password
Changed thru editbox "Password:"
- webui.restrict
Changed thru editbox "Restrict access to the following IPs"
- webui.port
Changed thru editbox "Alternative listening port:"
Notes on WebUI tab:
The password field comes with * on place of real password, but can be changed.
Tab Advanced:
All those options come as they are, no need for explanation
- bt.allow_same_ip
- bt.auto_ul_factor
- bt.auto_ul_interval
- bt.auto_ul_min
- bt.auto_ul_sample_average
- bt.auto_ul_sample_window
- bt.ban_ratio
- bt.ban_threshold
- bt.compact_allocation
- bt.connect_speed
- bt.enable_tracker
- bt.graceful_shutdown
- bt.multiscrape
- bt.no_connect_to_services
- bt.no_connect_to_services_list
- bt.prio_first_last_piece
- bt.scrape_stopped
- bt.send_have_to_seed
- bt.set_sockbuf
- bt.transp_disposition
- bt.use_ban_ratio
- bt.use_rangeblock
- dht.rate
- diskio.coalesce_write_size
- diskio.coalesce_writes
- diskio.flush_files
- diskio.no_zero
- diskio.smart_hash
- diskio.smart_sparse_hash
- diskio.sparse_files
- diskio.use_partfile
- gui.bypass_search_redirect
- gui.compat_diropen
- gui.default_del_action
- gui.delete_to_trash
- gui.graphic_progress
- gui.log_date
- gui.piecebar_progress
- gui.tall_category_list
- gui.update_rate
- ipfilter.enable
- isp.bep22
- net.bind_ip
- net.calc_overhead
- net.low_cpu
- net.max_halfopen
- net.outgoing_ip
- net.outgoing_max_port
- net.outgoing_port
- net.upnp_tcp_only
- net.wsaevents
- peer.disconnect_inactive
- peer.disconnect_inactive_interval
- peer.lazy_bitfield
- peer.resolve_country
- queue.dont_count_slow_dl
- queue.dont_count_slow_ul
- queue.prio_no_seeds
- queue.slow_dl_threshold
- queue.slow_ul_threshold
- queue.use_seed_peer_ratio
- rss.smart_repack_filter
- rss.update_interval
- sys.enable_wine_hacks
- webui.token_auth
Notes on Advanced tab:
No need for notes, all fields have exact same name as uTorrent.
UI Extras tab:
- gui.manual_ratemenu
Changed thru checkbox "Override automatic speed popup list"
- gui.ulrate_menu
Changed thru editbox "Upload speed list"
- gui.dlrate_menu
Changed thru editbox "Download speed list"
- gui.persistent_labels
Changed thru editbox "Persistent labels"
Notes on UI Extras tab:
Field "Search Engines" could not be changed thru WebUI.
Disk Cache tab:
- cache.override
Changed thru checkbox "Override automatic cache size and specify the size manually (MB):"
- cache.override_size
Changed thru editbox of "Override automatic cache size and specify the size manually (MB):"
- cache.reduce
Changed thru checkbox of "Reduce memory usage when the cache is not needed"
- cache.write
Changed thru checkbox of "Enable caching of disk writes"
- cache.writeout
Changed thru checkbox of "Write out untouched blocks every 2 minutes"
- cache.writeimm
Changed thru checkbox of "Write out finished pieces immediately"
- cache.read
Changed thru checkbox of "Enable caching of disk reads"
- cache.read_turnoff
Changed thru checkbox of "Turn off read caching if upload speed is slow"
- cache.read_prune
Changed thru checkbox of "Remove old blocks from the cache"
- cache.read_thrash
Changed thru checkbox of "Increase automatic cache size when cache thrashing"
- cache.disable_win_write
Changed thru checkbox of "Disable Windows caching of disk writes"
- cache.disable_win_read
Changed thru checkbox of "Disable Windows caching of disk reads"
Notes about Disk Cache:
Nothing, all fields found.
Various other options I figured out:
- show_toolbar
Changed thru Options, Show Toolbar (F4).
- show_details
Changed thru Options, Show Detailed Info (F5).
- show_status
Changed thru Options, Show Status Bar (F6).
- show_category
Changed thru Options, Show Category List (F7).
- show_tabicons
Changed thru Options, Icons on Tabs
- resolve_peerips
Changed with right click on peer list, Resolve Peer IPs
- gui.last_preference_tab-1.8
Latest preferences tab, on Settings menu
- gui.last_overview_tab-1.8
Latest overview (General, Trackers, Peers, Pieces, Files, Speed, Logger)
- mainwnd_split_x
Vertical splitter (the one from labels) position
- mainwnd_split
Horizontal splitter (the one from torrent list) position
But, unluckily, I have not figured for what are these:
reload_freq
k
v
pd
pu
asip
asdns
ascon
asdl
logger_mask
extras
score
ct_hist_comm
ct_hist_flags
ct_hist_skip
gui.sg_mode
webui.cookie
So any kind of help on them is appreciated!
Thanks!
Offline
- logger_mask
A bitmask that controls which logger settings are enabled in the µTorrent Logger tab
- score
The Tetris high score
- webui.cookie
A data persistence/storage location for any application using the WebUI API
The rest I'm not too certain about. And thank you for the list, I wanted to eventually list everything too, but was too lazy and unmotivated to do it. Saves me a lot of trouble xD
[size=0.85][ Tweaking Checklist | User Manual | BEE | MiniUI | µTA ][/size]
Offline
Offline
