AnA Posted August 19, 2006 Report Share Posted August 19, 2006 HeyaRecently I've had problems with uTorrent and dont want to change my client...I'll start up uTorrent and the torrents will connect to the trackers and download normaly.After 15-60 mins or so, Trackers will report back as offline or timedout, and all torrents will stop downloading and seeding.Interent will still work as normal. Motherboard Information Motherboard Model AS8 / AS8-V (Intel i865-ICH5) Motherboard Vendor http://www.abit.com.tw/ Motherboard Version 1.0 Chipset Model 82865G/PE/P, 82848P DRAM Controller / Host-Hub Interface Chipset Vendor Intel Corporation BIOS Model Phoenix-Award BIOS v6.00PG BIOS Vendor Award Software Inc. BIOS Id 07/22/2005-i865PE-W83627-6A79AA1MC-18 BIOS Date 07/22/05 Processor Info (from BIOS) Socket Designation Socket 775 Processor Type Central Processor Processor Family Specific Pentium Version Manufacturer Intel Processor Version Intel® Pentium® 4 CPU Procesor ID 00000F34-BFEBFBFF Supported Voltage(s) 1.3 Volts Current Voltage 1.3 Volts External Clock 204 MHz Maximum Speed 4000 MHz Current Speed 3468 MHz Processor Status CPU Socket Populated, Status Enabled Processor Upgrade ZIF Socket L1 Cache Handle $0A L2 Cache Handle $0B L3 Cache Handle N/A Processor Model Intel Pentium 4 Type Primary Processor Vendor Intel Corporation Family Intel P4 Family Hardcoded Name Intel® Pentium® 4 CPU 3.40GHz Frequency 3468 MHz Family/Model/Stepping 15/3/4 Logical CPU Count 2 Apic ID 1 CL Flush 8 Detailed Info Address Bus Width 36 Bit Core Details 126 µOPs, 48 Loads, 24 Stores In-Flight Data Bus Width 64 Bit Execution Speed Up to 6 µOPs/Cycle Execution Units Double-pumped ALU, FP Move/Store/FXCH, Double-pumped ALU, Slow ALU, FP Execute, Load, Store Floating Point Integrated Instruction Decoder 1x IA-32/Cycle Instruction Set IA-32 Multimedia MMX, SSE, SSE2 Multiprocessing SMP, using integrated local xAPICs Physical Memory 2^36 Bit (64 GB) Pipeline Depth 20 Stages Power Management HLT, STPCLK, SMI/SMM, Sleep, Deep Sleep, Automatic Clock Throttling Processor Core RISC, Out-of-order and Speculative Execution Processor Modes Real, Protected, Virtual, Paging, SMM, Probe Mode Registers 32 Bit Integer, 80 Bit FP, 64 Bit MM, 128 Bit SSE and SSE2 Split Voltage Yes (Automatically determined via VID Pins) Supported External Bus Speed 100, 133 MHz Quad-Pumped, AGTL+ Supported Multiplier 13.0x, 14.0x, ..., 24.0x Virtual Memory 65,528 GB (~64 TB) Cache Configuration L1 Code TLB 4 KB pages, 4-way set associative, 32 entries 4 KB/4 MB/2 MB pages, fully associative, 64 entries L1 Data TLB 4 KB/4 MB pages, fully associative, 64 entries L2 Cache None Trace L1 Cache 12 KµOPs, 8-way set associative Unified L2 Cache 1024 KB size, 8-way set associative, 64 byte lines, sectored Processor Features Floating-point Unit on chip (FPU) Yes MMX Instructions (MMX) Yes MMX Instruction Extensions (MMX+) No 3DNow! Instructions No 3DNow! Instruction Extensions (3DNow!+) No Streaming SIMD Extensions (SSE) Yes Streaming SIMD Extensions 2 (SSE2) Yes Multiprocessor Capable No x86-64 Long Mode (LM) No Virtual Mode Extension (VME) Yes Debugging Extension (DE) Yes Page Size Extension (PSE) Yes Time Stamp Counter (TSC) Yes Model Specific Registers (MSR) Yes Physical Address Extension (PAE) Yes Machine Check Exception (MCE) Yes CMPXCHG8 Instruction (CX8) Yes On-chip APIC Hardware (APIC) Yes Fast System Call (SEP) Yes Memory Type Range Registers (MTRR) Yes Page Global Enable (PGE) Yes Machine Check Architecture (MCA) Yes Conditional Move Instruction (CMOV) Yes Page Attribute Table (PAT) Yes 36-bit Page Size Extension (PSE36) Yes 96-bit Processor Number (PSN) No CLFLUSH Instruction (CLFSH) Yes Debug Trace Store (DTS) Yes ACPI Supported (ACPI) Yes Fast Save and Restore (FXSR) Yes Self Snoop (SS) Yes Thermal Monitor Supported Yes IA-64 Processor Capable (IA-64) No Description WinSock 2.0 Max. Version 2.2 Status Running Enabled Yes General Information Attached to a network Yes Local Host ana Local IP 192.168.2.3 Installed Drivers Network Adapters Belkin 802.11g Network Adapter Realtek RTL8139 Family PCI Fast Ethernet NIC TCP Statistics Retransmission time-out (RTO) algorithm in use Van Jacobson's Algorithm Minimum retransmission time-out 300 milliseconds Maximum retransmission time-out 120000 milliseconds Maximum number of connections Dynamic Active open connections 32980 Passive open connections 3263 Failed connection attempts 19969 Established connections that have been reset 6435 Currently established connections 549 Segments received 722090 Segments transmitted 604162 Segments retransmitted 84886 Errors received 36 Segments transmitted with reset flag 9972 Cumulative number of connections 702IP Statistics IP forwarding enabled Yes Default initial time to live (TTL) for datagrams 128 Seconds Datagrams received 730050 Datagrams received that have header errors 0 Datagrams received that have address errors 35 Datagrams forwarded 0 Datagrams received that have an unknown protocol 0 Received datagrams discarded 0 Received datagrams delivered 730035 Outgoing datagrams that IP is requested to transmit 696557 Outgoing datagrams discarded 0 Transmitted datagrams discarded 0 No route datagrams 0 Reassembly timeout 60 Seconds Datagrams that require reassembly 30 Datagrams that were successfully reassembled 15 Datagrams that cannot be reassembled 0 Datagrams that were fragmented successfully 0 Datagrams that weren't successfully fragmented 0 Fragments created 0 Number of interfaces 2 Number of IP addresses associated with this computer 2 Number of routes in the IP routing table 7 Ports are openComputer is connect through the Realtek RTL8139 Family PCI Fast Ethernet NIC to the Belkin 802.11g Network Adapter to the net.I think i notice it happen more when the computer is idle.Sorry for the long post, i tried to put in all relevant info. Link to comment Share on other sites More sharing options...
DreadWingKnight Posted August 19, 2006 Report Share Posted August 19, 2006 1> Many Belkin routers are reported to have problems when handling over about 60 connections.2> With all that info, you neglected to include your antivirus and firewall software.3> You didn't include ANY of your settings for uTorrent Link to comment Share on other sites More sharing options...
faroo Posted August 19, 2006 Report Share Posted August 19, 2006 See my other post "µtorrent 1.5 and 1.6 "also I am having the same problem with µtorrent 1.5 and 1.6 but 1.6 particularly.my firewall is zoneAlarmn norton antivirus software, Link to comment Share on other sites More sharing options...
DreadWingKnight Posted August 19, 2006 Report Share Posted August 19, 2006 faroo, this is your only warning. Don't even attempt to thread hijack. Link to comment Share on other sites More sharing options...
AnA Posted August 19, 2006 Author Report Share Posted August 19, 2006 Antivirus : Avast with p2p shield disabledWindows firewall disableduTorrent settings : Ports open, no proxy, UPnP Enabled, DHT Scrape Peer Echhange enabled, Protocol Encryption Disabled.10 active, 5 download (problem still ocours with 1 dowload)1000 max global connections200 per torrent5 upload per torrentunlimited download35 upload limitmax half open connections 40 - windows patched to 50Regards Link to comment Share on other sites More sharing options...
DreadWingKnight Posted August 19, 2006 Report Share Posted August 19, 2006 1000 max global connections200 per torrentFar too many. Take them down to 60/30.max half open connections 40 - windows patched to 50You shouldn't fiddle with the halfopen setting. 8 is plenty Link to comment Share on other sites More sharing options...
AnA Posted August 20, 2006 Author Report Share Posted August 20, 2006 That seemed to have done the trick.Thank you. Link to comment Share on other sites More sharing options...
faroo Posted August 20, 2006 Report Share Posted August 20, 2006 Well, To hijack the thread wasnt my intention, The point was to combine the same problem opened in two threads into one thread , Although i opened my thread 1½ hour before this thread. Anywaz, my max connection / per torrent connection was set to 100/70I will bring it down to 60/30 to see if that helpshowever the halfopen connection is set to default value of 8Thanks Link to comment Share on other sites More sharing options...
zecompadre Posted August 26, 2006 Report Share Posted August 26, 2006 try to turn off uPnP ! Link to comment Share on other sites More sharing options...
Switeck Posted August 27, 2006 Report Share Posted August 27, 2006 AnA, also if you're allowing 10 torrents active at once...you'll need to reduce upload slots to 2 or 3. Your upload speed is too slow to be a good sharer (or even meet BitTorrent protocol limits for flow control) if upload slots or max torrents at once are set higher. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.