Naepstar Posted September 13, 2006 Report Share Posted September 13, 2006 Hi, Ive used this client before without any problems whatsoever, then suddenly out of what seems to be nowhere, my ports are closed and I cant seem to open them. Im not sure what have caused it. I have tried disabling my firewall, tried to reinstall the client, change ports, forward the changed ports in the firewall, but even with the firewall off! there seem to be no ports open.Any help would be appreciated. Link to comment Share on other sites More sharing options...
Ultima Posted September 13, 2006 Report Share Posted September 13, 2006 Did you set up a static IP? What firewall are you using? Link to comment Share on other sites More sharing options...
Naepstar Posted September 13, 2006 Author Report Share Posted September 13, 2006 Im currently just using the windows regular firewall. I dont know if it came out wrong, I can easily acces the internet and stuff, its just the client that doesnt seem to send or accept incomming traffic. And my net settings are set to automaticly pick an IP address. Link to comment Share on other sites More sharing options...
Ultima Posted September 13, 2006 Report Share Posted September 13, 2006 You have to set up a static IP. Check the setup guide for instructions. Link to comment Share on other sites More sharing options...
Naepstar Posted September 14, 2006 Author Report Share Posted September 14, 2006 That boogles me, Ultima, when I used the client very recently it was also with automaticly chosen IP.. =\ Link to comment Share on other sites More sharing options...
Ultima Posted September 14, 2006 Report Share Posted September 14, 2006 Regardless, you got lucky before, as dynamic doesn't mean it's changing all the time, it just means it's not necessarily static all the time, and will be dynamic if it has to be. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.