Firon Posted April 6, 2007 Author Report Share Posted April 6, 2007 AfghanEB: UPnP is being tested more thoroughly to find out what the problem is. Link to comment Share on other sites More sharing options...
jeebai Posted April 6, 2007 Report Share Posted April 6, 2007 Having the same problem with josh2 with several of the private local tracer here in Thailand. Though, it does connected to peers but at a much much slower rate than 1.6.1. Link to comment Share on other sites More sharing options...
AfghanEB Posted April 6, 2007 Report Share Posted April 6, 2007 After further testing with this beta, UPnP does appear to be working (when I have the automatic upload option enabled) but it still encounters the initial "unable to map" delay.[01:02:43] Unable to map UPnP Port.[01:02:43] Unable to map NAT-PMP Port.[01:04:28] Uplink limit auto adjusted to 50.0 kB/s[01:04:34] UPnP: Discovered new device: http://192.168.1.1:5431/uuid:0016b663-6e0e-0016-b663-6e0e02ec0000/WANIPConnection:1[01:04:35] UPnP: Mapped port 29381 -> 192.168.1.102:29381In cases where the automatic upload option is disabled, it still starts off with the "unable to map" error and takes the software over 10 minutes to get UPnP working on a later attempt. Link to comment Share on other sites More sharing options...
Dracon Posted April 6, 2007 Report Share Posted April 6, 2007 Tried all the suggestions and it still dissappears, another problem I just tried to download a torrent and it reported that the tracker was offline even after leaving it for 25 minutes and yet when I tried it with a different client the tracker connected straight away. Link to comment Share on other sites More sharing options...
miik Posted April 6, 2007 Report Share Posted April 6, 2007 So does 1092 fix the crashes from a lack of a .torrent file? Link to comment Share on other sites More sharing options...
Firon Posted April 6, 2007 Author Report Share Posted April 6, 2007 Yes. Link to comment Share on other sites More sharing options...
aviramof Posted April 6, 2007 Report Share Posted April 6, 2007 what about list of changes for the new version version 1092?10x in advance. Link to comment Share on other sites More sharing options...
FadeToBlack Posted April 6, 2007 Report Share Posted April 6, 2007 aviramof, you have it on the first page. Link to comment Share on other sites More sharing options...
kokobaroko Posted April 6, 2007 Report Share Posted April 6, 2007 Why does it constantly try to IP_DROP_MEMBERSHIP ? Why is it even thinking about multicasting?umm wait, its 0x13 = 19 = IPPROTO_IP Link to comment Share on other sites More sharing options...
kdr8 Posted April 6, 2007 Report Share Posted April 6, 2007 My Planet ADE-4400BV2 works fine with 1.7.1092 even with this log report[01:02:43] Unable to map UPnP Port.[01:02:43] Unable to map NAT-PMP Port.Port forwarding is ok and runs automaticallyDownload is little-bit slower may be 5%No crashes to report for nowgood work for beta Link to comment Share on other sites More sharing options...
salko Posted April 6, 2007 Report Share Posted April 6, 2007 I have same problem with uPnP, µTorrent 1.6 without uPnP problem, but this beta report 'Unable to map UPnP Port.'Routre Linksys WRT54G with DD-WRT software. Link to comment Share on other sites More sharing options...
phaser Posted April 6, 2007 Report Share Posted April 6, 2007 The new features & fixes from 1.7 beta are great...But I don't like the "Add New Torrent" dialog. Now I cannot select a range of files by dragging a rectangle around them, by presssing CTRL or SHIFT... Link to comment Share on other sites More sharing options...
jzu Posted April 6, 2007 Report Share Posted April 6, 2007 i found a little bug.when a new torrent file is added and when i change the path by typing on keyboard, the disk space won't update as the drive i changed, i remember it's work in v1.6, please fix this bug, thank you Link to comment Share on other sites More sharing options...
hace Posted April 6, 2007 Report Share Posted April 6, 2007 "i found a little bug.when a new torrent file is added and when i change the path by typing on keyboard, the disk space won't update as the dirve i changed, i remember it's work in v1.6, please fix this bug, thank you"Same here... Link to comment Share on other sites More sharing options...
dAbReAkA Posted April 6, 2007 Report Share Posted April 6, 2007 1.6 beta used to freeze for several seconds when an invalid location was provided in the field..not that it's that relevant.. just trying to prevent it when re-implemented Link to comment Share on other sites More sharing options...
aviramof Posted April 6, 2007 Report Share Posted April 6, 2007 no i don't have a list of changes of version 1092 on the first pageonly versions 1085 and 1065. Link to comment Share on other sites More sharing options...
Myros Posted April 6, 2007 Report Share Posted April 6, 2007 Downloaded the normal version...Something is wrong with the Bandwidth Allocation option. I click Normal, and normal and low both get a check mark next to 'em. I click on High, high and low have a check mark next to them. And some other random combinations. Just thought I'd point it out. Link to comment Share on other sites More sharing options...
FadeToBlack Posted April 6, 2007 Report Share Posted April 6, 2007 Myros, it got fixed in the last beta.I have a cute problem. On a private tracker, µTorrent doesn't connect to all the seeders. It just takes the first one, then it's not working right. Link to comment Share on other sites More sharing options...
dAbReAkA Posted April 6, 2007 Report Share Posted April 6, 2007 why should it connect to all the seeders? it gets the peer list and connects to the specified number of peers.. it doesnt know if there's a seeder or a leecher behind a certain IP until it connects to it.. Link to comment Share on other sites More sharing options...
jeebai Posted April 6, 2007 Report Share Posted April 6, 2007 dAbReAkA, I think what FadeToBlack means is that once it is connected to one seeder (even there are hundreds of other seeders around) it will stop connecting to other seeders or very slowly connecting to other peers. My friends and I have the same problem with dAbReAkA as well so I think I understand what he is trying to say here. Cheers :-) Link to comment Share on other sites More sharing options...
DenisCool Posted April 6, 2007 Report Share Posted April 6, 2007 About option 'maximum upload rate', I think that option 'Automatic' should be also added to systray menu like additional item inside 'Upload limit'. Link to comment Share on other sites More sharing options...
DreadWingKnight Posted April 6, 2007 Report Share Posted April 6, 2007 Connecting to more seeds doesn't get you as much benefit as you'd think.In many swarms you get better speeds if you connect to 0 seeds than if you connect only to seeds.The behavior you describe is normal for swarms with a large number of downloaders alongside the large number of seeds.If you want to see if the behavior is actually happening widespread, try OpenOffice torrents or other equally top-heavy torrents. Link to comment Share on other sites More sharing options...
Ultima Posted April 6, 2007 Report Share Posted April 6, 2007 @kokobaroko: UDP Multicast is used for Local Peer Discovery. Link to comment Share on other sites More sharing options...
hifi2005 Posted April 6, 2007 Report Share Posted April 6, 2007 i scout around the forums every so often to check on things such as new releases ectand im glad i did.im trying the µTorrent 1.7 beta 1092 and so far its ok .ive always been intrested in u torrent because as a client its got a nice look to it but ive been getting problems with other versions which has prevented me from using any version up untill this one.in other versions of u torrent ive been getting strange things going on , like my connection would slow to a crawl as soon as i ran it and was very hard to browse any site.i dont know what has happened here but it is now working fantasticthis is the first time ive been able to upload at past 10 kb/s and still able to use the web my cap is 65kb/s and im running at 56kb/s with no problems at all.theres a small bug with upnp but nothing major.i want to thank you for now what seems to be a client i will stick with.please please what ever you did to fix it dont mess it up with the final lol Link to comment Share on other sites More sharing options...
josh2 Posted April 6, 2007 Report Share Posted April 6, 2007 I had to go back to 1.6.1.... this beta just won't connect to any peers on this one tracker when I'm trying to download. It seeds fine, just won't download. Other than that, everything was working nicely. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.