Jump to content

Hamachi -> UPnP not working


tobbez

Recommended Posts

When hamachi is installed UPnP doesn't work, giving these messages:

[01:38:01]  Unable to map UPnP Port.
[01:38:01] Unable to map NAT-PMP Port.

I'm not 100% sure hamachi is the cause, but I first tried to map the ports with µtorrent, suceeded, then shut µtorrent down, installed hamachi, started µtorrent again, and then UPnP did not work.

Link to comment
Share on other sites

I just solved this problem now after a few weeks of being completely puzzled. The thing is that I think uTorrent only tries to talk to the Hamachi interface for using uPnP, but stops after that and does not try your actual network card's interface. I also noticed this happening in other programs that utilized uPnP.

The solution is to have your Local Area Connection take preference over Hamachi.

Go to Control Panel > Network Connections. Then Advanced Menu > Advanced Settings. Adapters and Bindings Tab. Hamachi is probably the first entry under Connections here, so push it down and have Local Area Connection the highest entry.

Hope that works.

Link to comment
Share on other sites

  • 2 weeks later...

This is what the log said.

[00:06:04] UPnP: Received invalid query from UPnP device

[00:06:07] UPnP: Could not map UPnP Port on this pass, retrying.

[00:06:13] UPnP: Could not map UPnP Port on this pass, retrying.

[00:06:19] UPnP: Could not map UPnP Port on this pass, retrying.

[00:06:25] UPnP: Unable to map UPnP Port.

Disabled the Hamachi Adapter and chose a new port.

[00:08:24] UPnP: Discovered host: http://192.168.1.1:5431/dyndev/uuid:0014-bf8a-11a400981c84

[00:08:29] UPnP: Mapped port 25357 -> 192.168.1.138:25357

Hope it helps :)

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...