Saerjin Posted July 31, 2007 Report Share Posted July 31, 2007 For as long as I can remember I have been getting the following errors.UPnP: Could not map UPnP Port on this pass, retrying.NAT-PMP: Unable to map port with NAT-PMP.UPnP: Unable to map port xx.xx.xx.xx:xxxxx with UPnP.I am not behind a router, I get the same results with or without my firewall (latest Outpost) but these errors have never really shown any impact. Is this possibly something that I should be concerned about? Like I said it doesn't really seem to be doing anything - Although there are a few specific trackers that does not seem to update my dl/up accurately or even at all for that matter. I am currently using Windows XP(sp2) with uT1.7.2 (3458) and I believe I have had this "issue" since before 1.7And for that matter, Do I even need to have UPnP and NAT enabled since I am not behind a router? Link to comment Share on other sites More sharing options...
Ultima Posted July 31, 2007 Report Share Posted July 31, 2007 The errors are benign, and as you suspect, you don't need UPnP or NAT-PMP on if you aren't behind a NAT, as they're just methods of automating NAT configuration. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.