Jump to content

Port Forwarding


elysiantraveller

Recommended Posts

So I have been at this for a few hours now and still no luck so any help would be appreciated. Here is my set-up.

ISP: Dish Network

Speed: 101KBS

Modem: Linksys BEFCMU10

Router: WRT150N

TCIP Patch: Yes 100 (Utorrent set to 60205)

Software Firewalls: None I am aware of.

Antivirus Software: Mcafee, Utorrent is set to be used.

So here is the situation. I have been trying to port forward for most of the day and here is where I am at right now, as I have tried a lot of am will to do anything at this point. Also my status at the bottom is the yellow triangle with exclamation point in it saying no incoming connections. I am currently operating at 150kbs/down and 100kbs/up. Here is my ipconfig:

Microsoft® Windows DOS

©Copyright Microsoft Corp 1990-2001.

C:\DOCUME~1\OWNER>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : DiscoTek

Primary Dns Suffix . . . . . . . :

Node Type . . . . . . . . . . . . : Hybrid

IP Routing Enabled. . . . . . . . : No

WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Wireless Network Connection 2:

Connection-specific DNS Suffix . :

Description . . . . . . . . . . . : Broadcom 802.11g Network Adapter

Physical Address. . . . . . . . . : 00-14-A5-81-FE-09

Dhcp Enabled. . . . . . . . . . . : No

IP Address. . . . . . . . . . . . : 192.168.1.136

Subnet Mask . . . . . . . . . . . : 255.255.255.0

Default Gateway . . . . . . . . . : 192.168.1.1

DNS Servers . . . . . . . . . . . : 12.127.16.67

12.127.17.71

As you can see I shut off DHCP and went static with this comp. I currently have upnp working with the static configured but when I run to test my port I get this.

Welcome to the µTorrent Port Checker.

A test will be performed on your computer to check if the specified port is opened.

Checking port 60205 on 12.157.128.170...

Error! Port 60205 does not appear to be open.

Now I am aware that this is my external IP. Is this what is causing the hiccup? Here is what my router is currently set to.

Internet Connection Type: Automatic Configuration - DHCP

Network Setup

Router IP

IP Address: 192.168.1.1

Subnet Mask: 255.255.255.0

DHCP Server Setting DHCP Server: Enabled

Start IP Address: 192 . 168 . 1.100

Maximum Number of Users: 50

IP Address Range: 192.168.1.100 ~ 149

Client Lease Time: minutes (0 means one day)

Static DNS 1: 12.127.17.71

Static DNS 2: 12.127.16.67

Static DNS 3: . . .

WINS: . . .

Thats my basic setup. Here is my forwarded port.

Under Single Port Forwarding

Name: Utor

EXT Port: 60205

INT Port: 60205

Protocol: Both

To IP: 192.168.1.136

So that is my situation, no port forwarding, I am new to this so bear with me but I have searched far and wide today to get the answers and no go. I am currently running a static IP on this system and as you can see followed port forward word for word.... any help would be greatly appreciated!

Thanks!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...