Important note for any HyperWRT tofu users

[Firon]

If you use UPnP and use HyperWRT2.1b1 tofu9 (or earlier), upgrade to version 10, since tofu9 had problems with UPnP. Even if you don't, you should upgrade anyway

http://tofu.polarcloud.com.nyud.net:8090/HyperWRT_G_tofu10.zip

As always, this is for the HypeWRT54G/GL, NOT GS

changelog from http://www.hyperwrt.org/forum/viewtopic.php?id=780

tofu10 changelog

* Linksys 4.30.1 (GL) code base. Nothing really new here, just nice to have a new version number.

* Downgraded iptables to 1.2.11 from 1.3.3 since it was causing problems with UPnP. u32 and CLASSIFY added.

* Fixed a problem with QoS auto mode not working. The estimated bandwidth is now fed back into the web page so the user can see it. And a warning is now shown if the end device about to be profiled is on a private address (the modem for example).

* In Client Mode, clone mac now sets the wireless interface.

* DHCP server now acts as the authoritative server. An initial request for an unknown or stale IP address is now denied.

* UPnP page added. It lists current mappings and allows you to delete them. Also added is an option to always clear UPnP entries at startup.

* Messed around with UPnP code. The router now identifies itself as "Linksys WRT54G/GL (192.168.1.1)" which should be visible in Windows' My Network Place. This can be disabled from the UPnP page.

* Factory defaults page now also has an option to clear the entire nvram.

* Changed backup/restore page. The file naming has been changed to include a config version and a checksum of the router's mac. A warning is given when restoring from a file whose filename doesn't match this name. Also fixed a small leak in backup.

* Changed upgrade page... It looks nicer.

* Added an option for enabling Spanning-Tree Protocol which is used to prevent loops if there are multiple paths in a network.

* Fixed some issues with NAS which may have caused problems with WPA/WPA2.

* Fixed a problem with WEP and index > 0.

* Enabled channel 14.

* WDS interfaces are now shown in Device List.

* Fixed ifconfig chopping off last character of WDS name.

* Added an option to run telnetd at startup. Also added is an option to reject wireless access to shell.

* When a wireless computer is not allowed to access the admin page, the connection is now just closed silently.

* Site survey page added (finished). You need a browser that supports XMLHTTP like Firefox, Opera or Internet Explorer.

* And a lot of mini changes I no longer remember...