lost_whlanl Posted November 28, 2007 Report Share Posted November 28, 2007 Hello (i'm in Aust)I was using bitlord but it seems to be getting blocked by some trackers now, so I need to change. I've installed utorrent, but get terribly slow speeds and it seems to cause IE to just not work.I really have NFI, that's why I was using bitlord, it just worked ok, so I have a Dynalink RTA100+ modem (I know, it's a dinosaur, but it works!) 192.168.1.1also have a DI-524 wireless router to connect other machines 192.168.0.1and have Norton 14.0.4.1My network connections list 31394 Connection 1394 Net Adapter obtain IP Address automaticallyLocal Area Connection 2 Dynalink RTA100+ USB#2 obtain IP Address automaticallyLocal Area Connection 3 Marvell Yukon Gigabit Ethernet 10/100/1000... use the following IP Address IP 192.168.0.4 subnet 255.255.255.0 default gateway 192.168.0.1 use the following DNS Preferred 192.231.203.132 alternate 192.231.203.3ipconfig /all hasLAC 3 as aboveLAC 2 IP 192.168.1.3 subnet 255.255.255.0 default gateway 192.168.1.2 DHCP 192.168.1.2 DNS servers 192.168.1.2dynalink has (services > NAT > Rule Entry)NAT Rule Information Rule ID: 2 Rule Flavor: RDR IF Name: ALL Protocol: ANY Local Address From: 192.168.0.4 Local Address To: 192.168.0.4 Global Address From: 0.0.0.0 Global Address To: 0.0.0.0 Destination Port From: 56179 Destination Port To: 56179 Local Port: 56179 Rule ID: 3 Rule Flavor: RDR IF Name: ALL Protocol: ANY Local Address From: 192.168.1.3 Local Address To: 192.168.1.3 Global Address From: 0.0.0.0 Global Address To: 0.0.0.0 Destination Port From: 56179 Destination Port To: 56179 Local Port: 56179 Rule ID: 4 Rule Flavor: RDR IF Name: ALL Protocol: ANY Local Address From: 121.45.240.211 Local Address To: 121.45.240.211 Global Address From: 0.0.0.0 Global Address To: 0.0.0.0 Destination Port From: 56179 Destination Port To: 56179 Local Port: 56179 (this one seems to be my ip address when i test the port is opened in utorrent, so I added it as well - told you I have NFI)... In DI-524 I have addedUTor1 - 192.168.0.4 (it defaults the start of the IP, I just get to enter in 4)TCP AND UDP56179, public and privateSo, I'm not sure if the IP address settings are right, the portforwarding page tells me to set it to be static, i have one set, but do I need to do the dynalink also? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.