godspeed Posted December 31, 2005 Report Share Posted December 31, 2005 Ok, i have searched, can't seem to find what i need and have tried a lot of things, 1st off i have zonealarm running on my pc, latest version. I have installed the patch that made things a lot faster, the one from LvlLord.de, the thing is, that i have the Nat error, i have tried to config the firewall, i turned it off, and i still get the nat error. I take the port from the network options, im useing 10000 and check it through the NatCheck, it comes up as fail, i have done this w/ the firewall off and everything. I live in Japan, and don't know if my provider does anything to block this or if they even can, I have a fast connection, running off of t-com.My systemXP sp2AMD athlone processor 1.33ghz640mb of ramalso, when running my system will do a slight pause, like if i move the mouse it will move but wont show its moving for about 2 secs then it will show up. I checked my resorces and utorrent is only using 6mb or something.my download speeds are on average 20kbs and up can be higher than that.please help me Link to comment Share on other sites More sharing options...
Firon Posted December 31, 2005 Report Share Posted December 31, 2005 You uninstalled Zone Alarm and disabled Windows Firewall / ICS?http://www.utorrent.com/faq.php#Incompatible_softwarehttp://www.utorrent.com/faq.php#Why_are_my_torrents_going_so_slow.3F Link to comment Share on other sites More sharing options...
godspeed Posted December 31, 2005 Author Report Share Posted December 31, 2005 I have been told that the zonealarm firewall has worked fine for others, and its not a nvidia firewall? I will try it and see if the problem goes away Link to comment Share on other sites More sharing options...
Firon Posted December 31, 2005 Report Share Posted December 31, 2005 Only the latest version of ZA (6.something, I forget), and it STILL gave problems for some people. (but far less than older versions) Link to comment Share on other sites More sharing options...
godspeed Posted January 2, 2006 Author Report Share Posted January 2, 2006 ok, so i unistalled it, and dont think that was it, i have the newest version of zonealarm, i also noticed that after took of zonealarm i did the Nat check and it still came up with a fail. My download speeds also stayed the same...so not going to blame zonealarm Link to comment Share on other sites More sharing options...
Firon Posted January 2, 2006 Report Share Posted January 2, 2006 Do you have a router by any chance? Or anti-virus software? Link to comment Share on other sites More sharing options...
godspeed Posted January 3, 2006 Author Report Share Posted January 3, 2006 no router....i have zonealarm for anti-virus, but i did an unistall of all of that, the thing is, im downloading a ok speeds i think, i just got half life at 65kbs down and up around 25kbs...does that sound bad? Link to comment Share on other sites More sharing options...
Firon Posted January 3, 2006 Report Share Posted January 3, 2006 If you're on Windows XP SP2, it has a firewall that's enabled by default. Might wanna turn it off too, or something... Link to comment Share on other sites More sharing options...
godspeed Posted January 3, 2006 Author Report Share Posted January 3, 2006 yeah, i have the firewall off, i did the patch that made it way better and seeemed to make windows run better...dont know what else to do Link to comment Share on other sites More sharing options...
splintax Posted January 3, 2006 Report Share Posted January 3, 2006 Which patch would that be?Oh, and how are you connected to the internet? A lot of modems have routers built in. If you go start -> run and type 'cmd', then type 'ipconfig' and hit enter, does the IP address start with 10 or 192? Link to comment Share on other sites More sharing options...
godspeed Posted January 3, 2006 Author Report Share Posted January 3, 2006 it has a 192 whats that mean? Link to comment Share on other sites More sharing options...
godspeed Posted January 3, 2006 Author Report Share Posted January 3, 2006 I have a NEC WD606CV ADSL modem, i think you are right about it having a router, but i have no clue as to how to forward the ports on this...can you please help, i went to the portforwarding page but they dont have nec on there...at least i didnt see it...thanks Link to comment Share on other sites More sharing options...
godspeed Posted January 4, 2006 Author Report Share Posted January 4, 2006 got it working!!!you were right i did have to forward the ports through my modem...kind of a pain, its all in japanese.if anyone else has t-com here is a link on how to do it.http://www.aterm.jp/contents/qa/atm4/182100050.html Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.