Jump to content

Failed hash check LOOP


imBe

Recommended Posts

What do I do when a torrent keep downloading the same "PIECE" over and over and eatch time it downloads it, it give the error:

*** filname bla bla bla: PIECE 705 FAILED HASH CHECK

I have forced a rechek many times, dosen't help, I have tryed downloading the torrent's that give me the problem with other clients and I get the same error.

I have read the FAQ about the DMZ and it isn't on and I don't have a D-link router, this has happen to alot of the torrents I dowloaded =(

Link to comment
Share on other sites

It's automatic.

And if the torrent has 200 seeders and YOU can't finish it, there's likely something on your end mangling the packet. Make sure you don't have a game mode or something on your router.

But first, look at the Peers tab and see if all the other non-seeders are stuck at 99.9% too. If they are, they're probably fake torrents (but not that likely).

Link to comment
Share on other sites

That has happened to me twice, my way to get the file was to Stop the torrent in µtorrent, restart the client (don't remember if I needed to reboot my machine) and then start again the transfer and get the suspicious piece.

Hope this helps. Sorry for my english :/

EDIT: Both times the torrent was using The Pirate Bay tracker.

Link to comment
Share on other sites

That has happened to me twice, my way to get the file was to Stop the torrent in µtorrent, restart the client (don't remember if I needed to reboot my machine) and then start again the transfer and get the suspicious piece.

Hope this helps. Sorry for my english :/

Have tryed that, it dosen't help =(

Link to comment
Share on other sites

  • 7 months later...

Like imBe, some torrents complete but, oddly, after a CRC32 check they have 1 or 2 particular pieces which always fail and it's confirmed by the hash check of the whole torrent afterwards.

I had the same type of problem with direct download by rapidshare.

Well, after about 10 days of checking hardware and all drivers, I found the only cause : bios

I updated from the 1010 final version to the 1011 beta version and now everything works !

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...