jackassjon Posted September 23, 2008 Report Share Posted September 23, 2008 hi, im using a ZyXel P-660HW-D1 router, and i would like to forward ports, however when i open the web base config, i doesnt let me. i have no icons or buttons etc which will let me change any details. On the left where it shows P-660HW-D1 under it there should normally be tabs saying netword security advance etc, but mine does not. can any one help me? im trying to forward port so i can host games on warcraft. thanks Link to comment Share on other sites More sharing options...
XXTickerXX Posted September 23, 2008 Report Share Posted September 23, 2008 Ive had problems with the zyxel as well.Quite simply they are crap!!.Only using since my netgear went down but you can port forward easily.First when you log in you will see the nat tab.Click that and look if there is a tick/dot in the SUA only setting.If there is no dot im afraid you cannot port forward but there should be.I`m assuming you have a static ip address already.If not you will have to set one up first.Click the edit settings of SUA and in the 1st line enter the port you want for warcraft and enter it in both boxes...eg 49500......49500 and then enter your static ip address on the right.Then click save and your done!!.Just wish this was working for utorrent and vista!!!. Link to comment Share on other sites More sharing options...
jackassjon Posted September 23, 2008 Author Report Share Posted September 23, 2008 yea the prob is there aint no nat tab thing.. dunno why.. it just gives me some info thats about it.. gahhhh.. hate this new router lol. using a mac to.. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.