Stoone Posted January 10, 2009 Report Share Posted January 10, 2009 I use Windows XP Home SP3. I click on install IPv6/Teredo, but i didnt got teredo address. Sorry for my English.ipconfig /all Přípona DNS podle připojení . . . : Popis . . . . . . . . . . . . . . : Automatic Tunneling Pseudo-Interface Fyzická Adresa. . . . . . . . . . : C0-A8-A8-64 Protokol DHCP povolen . . . . . . : Ne Adresa IP . . . . . . . . . . . . : fe80::5efe:192.168.168.100%2 Výchozí brána . . . . . . . . . . : Servery DNS . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS nad TCP/IP. . . . . . . . : zakázáno Link to comment Share on other sites More sharing options...
Firon Posted January 11, 2009 Report Share Posted January 11, 2009 start -> run -> netsh int ipv6 teredo clientIf it says OK, then do netsh int ipv6 show teredo and paste the output here. Link to comment Share on other sites More sharing options...
Stoone Posted January 11, 2009 Author Report Share Posted January 11, 2009 Google translator:Microsoft Windows XP [Version 5.1.2600]© Copyright 1985-2001 Microsoft Corp.C: \ Documents and Settings \ Andy> netsh int IPv6 Teredo clientThe following command was not found: int IPv6 Teredo client.C: \ Documents and Settings \ Andy> netsh int ipv6 show teredoTeredo Service Parameters---------------------------------------------Type: enterpriseclientServer Name: teredo.ipv6.microsoft.comUpdate interval client: defaultPort client: defaultStatus: OfflineError: client for symmetrical NAT deviceC: \ Documents and Settings \ Andy>Original language:Microsoft Windows XP [Verze 5.1.2600]© Copyright 1985-2001 Microsoft Corp.C:\Documents and Settings\Ondra>netsh int ipv6 teredo clientNásledující příkaz nebyl nalezen: int ipv6 teredo client.C:\Documents and Settings\Ondra>netsh int ipv6 show teredoParametry služby Teredo---------------------------------------------Typ : enterpriseclientNázev serveru : teredo.ipv6.microsoft.comInterval aktualizace klienta: defaultPort klienta : defaultStav : offlineChyba : klient za symetrickým zařízením NATC:\Documents and Settings\Ondra>I had two router. When I use old router and I write this in cmd: netsh interface ipv6 set teredo enterpriseclient - It's wotk fine. But my old router broke.And now with my new router (802.11 b/g Wireless Broadband Router) dont work with client and dont work with enterpriseclient. New router use DHCP is this problem? Router's manual: http://file.qip.ru/file/71015205/375a2fda/WBR_G_QSG_v211_u1_En.htmlhttp://file.qip.ru/file/71015319/26353887/WBR_G_UM_En.html Link to comment Share on other sites More sharing options...
moogly Posted January 12, 2009 Report Share Posted January 12, 2009 About Teredo, maybe you can read this thread, many points have been reported about enabling/disabling Teredo:http://forum.utorrent.com/viewtopic.php?id=49317And especially this post:http://forum.utorrent.com/viewtopic.php?pid=385039#p385039To get a Teredo address, you need to enable Windows Firewall because it's IPv6 aware. Link to comment Share on other sites More sharing options...
Stoone Posted January 12, 2009 Author Report Share Posted January 12, 2009 I use WinXP home, no Vista..... Link to comment Share on other sites More sharing options...
moogly Posted January 12, 2009 Report Share Posted January 12, 2009 It's the same issue surely. Did you enable Windows Firewall ? Link to comment Share on other sites More sharing options...
Stoone Posted January 13, 2009 Author Report Share Posted January 13, 2009 Windows firewall-on, but teredo off. Any idea? Link to comment Share on other sites More sharing options...
moogly Posted January 13, 2009 Report Share Posted January 13, 2009 It's not enough I think. Re-read the link I posted. Configure Teredo with Client (not Enterprise), choose an active Teredo server, set a port etc...Then look at in your router if a port is forwarded for Teredo (active UPnP if your router supports it) with the same port you set in ipconfig.NB: Teredo servers http://www.sixxs.net/tools/aiccu/brokers/ Link to comment Share on other sites More sharing options...
Stoone Posted January 16, 2009 Author Report Share Posted January 16, 2009 I dont know router's password. I send my IPS mail and IPS put my PC in DMZ. And now sometimes utorrent show Got teredo address,but often no. Once I connect with other Ipv6. Teredo connection isnt strong with all servers.netsh interface ipv6 show teredo Error: client for symmetrical NAT deviceBut somitimes for short time teredo connect...............Any idea? Isent my IPS mail,to deactive NAT on my router.....Now I wait for IPS answer.... Link to comment Share on other sites More sharing options...
moogly Posted January 17, 2009 Report Share Posted January 17, 2009 I dont know router's password.How can you manage your router ? Maybe you need to retrieve your pwd to enter in router's setup.When I'm using uT with Teredo, my router creates a port forwarding rule about Teredo with the port I set with "netsh interface ipv6". Link to comment Share on other sites More sharing options...
Stoone Posted January 17, 2009 Author Report Share Posted January 17, 2009 I can't manage my router. My IPS manage my router. Link to comment Share on other sites More sharing options...
moogly Posted January 17, 2009 Report Share Posted January 17, 2009 Have you really an use of Teredo ? Because uT works fine in 99% cases without it. Especially if you can't manage your router. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.