Jump to content

Uploading Issue!


robbiethief

Recommended Posts

I use 1.8.2

My connection speed is 2MBPS, seetings 2Mbit/xx, with an max upload speed of 60-65kbps.

I tried uploading torrents, well was successful, but i do have these queries:

I uploaded 5-10 torrents at a time, small files 10-50 Mb to larger one of 600 Mb.

Now i do know that the torrent created by µ itself creates number of pieces & etc..

I'd like to know if a torrent is being uploaded (initial seeding), does the client which is connected to

other peers gives different pieces to different peers connected or the same pieces of files to all connected

at that point of time?

Also to mention, if the initial seeding box is checked in the torrents properties, the upload speed drops down to

a meare 1/5 of the actuall speed.

i'd like to know how to boost up upload speeds.

Thnx

Robbie.

Link to comment
Share on other sites

If you're only seeing 60-65 KB/sec upload speeds...you don't have xx/2Mbit in Speed Guide!

You probably should use xx/640k (640 kilobit/sec upload settings.) :(

Initial seeding doesn't work very well, it pretty much requires you to be the 1st and only seed AND for there to be at least 3 peers (preferably more than 5 peers) to work...and even then it's SLOW!

Link to comment
Share on other sites

Irrespective of what settings i chose, be it xx/640 or any other (tried all)... the upload speed is stand still at 60-65kbps( the max). More frustration occurs when the speed drops drastically low when the intial seeding is checked in the torrent properties.( i use intial seeding as i upload 5-10 torrents a day(1seed,45+peers approx on all new torrents), file size varies, so if i dont use intial seeding, the smaller file uses up all the bandwidth leaving the larger files incomplete as i can seed only for 6 hours a day!)

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...