Cant Open port

[Patricks]

Hello,im new here.

Im seeking for helps,i have done so many researches from portforward website and i tried Simple Port Forwarding program to guide me,yet its not working at all.when i check the port it says its not open and i still can download.i really want to improve my speed in uploading and downloading somehow

Comp information

Windows:Vista 32xbit

Firewall:Internet Panda Security > I disabled it and use windows firewall and add the port and program to exception yet not working

Router:Lynksys WRT120N which is connected to motorola Broadband

Port:16842

Ip Address: 192.168.1.27

if theres any information that you need i will fill it up asap.um im newbie in this matter ( i guess i need more informations XD) .if someone can do teamviewer it'd be a great help

Best Regards.

[Switeck]

Your modem may have a router of its own in it, if so that router must be configured or disabled. (...possibly by putting the modem into DMZ mode to your Linksys router or bridge mode to your Linksys router.)

This is only your (computer's?) LAN IP addresses: 192.168.1.27 ...not your internet ip.

Disable UPnP and NAT-PMP on uTorrent 1 at a time to see if they work. Having both enabled at once can cause conflicts. Or disable both and do manual port forwarding from the router to the computer's LAN ip address on port 16842.

[Patricks]

Tq now its kinda clear to me,just need to search how to do it

Ok ive tried to connect from primary modem,when i done it i cant connect to internet at all and i cant access 192.168.1.1 website to configure my router.i tried to turn off DHCP server on my second router.none of them are working.

the primary modem is motorola SBV5121

[Patricks]

Sorry,need to bump.i edited my second post >.<

[Switeck]

Did you put the modem in bridged mode or DMZ mode?

How'd you configure it?

Does your router support ADSL PPPoE, which will probably be needed if the modem is in bridged mode?

[Patricks]

well my my lynksys does allow me to change internet mode into PPPoE.but i dont know how to fill the blanks that show up when i choose it

i dont know wats happening to my motorola since i cant restart the set up,cant connect to 192 either so it looks like i cant configure it,i never done anything to it either >.<

[KKraak]

You know when going to 192.168.1.1 you have username nothing and pass; admin ?

If you dont get the login screen unplug your router for 2 minutes. Unplugging really is pulling the plug out of the power-outlet in the wall, this will clear your routers cache and might solve the white screen (happens to me all the time >.<)

[Patricks]

@Kkrak done like what you said and theres nothing change to my motorola,gosh i think somehow i cant configure it at all.seems like its a dead end >.>

[Switeck]

Ask your ISP?