badfile Posted December 18, 2010 Report Share Posted December 18, 2010 When I run the setup guide I get the following messages:[2010-12-18 10:18:24] Executando teste de upload ...[2010-12-18 10:18:37] Dados enviados erro: Um problema na rede local fechou a conexão. (10053)[2010-12-18 10:18:37] Verificando por redirecionamentos de porta[2010-12-18 10:18:39] Resultados: Porta está aberta. Sua rede está configurada corretamente.[2010-12-18 10:18:39] Test de Redirecionamento de Porta completo. [2010-12-18 10:20:03] UPnP: Could not map UPnP Port on this pass, retrying.[2010-12-18 10:20:08] UPnP: Could not map UPnP Port on this pass, retrying.[2010-12-18 10:20:13] UPnP: Could not map UPnP Port on this pass, retrying.[2010-12-18 10:20:18] UPnP: Unable to map port 187.66.2.245:35000 with UPnP.I have no problems with the download, but to upload.Please, any suggestions to correct this fault?Note: I use a computer directly connected to cable modem.Thanks! Link to comment Share on other sites More sharing options...
Switeck Posted December 20, 2010 Report Share Posted December 20, 2010 Couldn't get Windows firewall auto-configured for uTorrent? Link to comment Share on other sites More sharing options...
badfile Posted December 20, 2010 Author Report Share Posted December 20, 2010 The firewall is inactive and does not use antivirus. According to the links that accompany the message, the problem, as I suspected, it is blocking the protocol (layer 7) by the ISP. Link to comment Share on other sites More sharing options...
Switeck Posted December 20, 2010 Report Share Posted December 20, 2010 In uTorrent, Preferences, Connection is "Add Windows Firewall exception" checked?uTorrent will generate an error message in logger if that's checked but Windows firewall is actually disabled. Link to comment Share on other sites More sharing options...
badfile Posted December 20, 2010 Author Report Share Posted December 20, 2010 Right now the port is cleared, but I've tested with the door and checked the errors are the same.The only difference is that if I use my router DI-524 error is 10060 and without it the error is 10053. Link to comment Share on other sites More sharing options...
Switeck Posted December 20, 2010 Report Share Posted December 20, 2010 On the assumption your ISP is to blame, run a Glasnost test....from here:http://broadband.mpi-sws.mpg.de/transparency/bttest.php Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.