Jump to content

slow uploading on B460


Nero

Recommended Posts

I've got problems with the beta, too. µ1.5=upload is stable at the limit I'd set. µ1.5.1(460/462)=upload changes from 1~2kb to 14~16kb within 10 seconds than it is stable for some seconds and crashing again to 0kb.... I've thought about this for a while but ????? So I've you know something, i would be very very grateful :)

PS:I'd like to have an answer, even if it is:"i'm sorry but...."

Link to comment
Share on other sites

tryed 460 and 462, same effect....

Firewalled but Portforwarded, DHT enabled, values from µTorrent and slightly modified down (slow up max. is between 16-19kb) half open to 100 in TCP and 32 in µ

Link to comment
Share on other sites

download isn't capped through the ISP(Lycos-(AOL ? )) and myself(down=0 ) Firewall is Hardware(Router-implemented) not the Windows crap or else, and like I said only with the latest beta's is the Upload spinning around

it looks like the beta won't upload to a peer for a long time and "kicks" him for another peer and it could never upload the full capacity

Link to comment
Share on other sites

I think I've found the answer: I'd only set the rate of upload slots to 2 and now I've set it to 3 the up is stable :) :) ;) I'm very lucky indeed

see on the screencap below(unstable and stable in 5sec screen

screenshot21cl.jpg

Link to comment
Share on other sites

There was a upload slot per torrent bug that caused torrents to ACTUALLY use 1 upload slot LESS than you set it to! If you set it to 2 or 1 upload slots, the only upload slot that gets used is the 'roaming' optimistic unchoke upload slot which is very intermittent in upload speed. ...so your upload speeds end up sucking.

This is my post (now in the Found Bugs forum) about the problem:

http://forum.utorrent.com/viewtopic.php?id=10638

It should be fixed in the next beta. :)

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...