ironboyzz Posted December 22, 2005 Report Share Posted December 22, 2005 I have never had this problem before so a little puzzled!I had been running ut for days, a reboot ... no net,fw,rtr changes at all and after starting ut have no network ok for the first time!No blocks from firewall reported and over net apps and browsing ok. Deleted settings and resume. No running UPnP and DHT!No clue where to start! Link to comment Share on other sites More sharing options...
ironboyzz Posted December 22, 2005 Author Report Share Posted December 22, 2005 Ok Finally got Network OK but took about 15 mins. Link to comment Share on other sites More sharing options...
Ultima Posted December 22, 2005 Report Share Posted December 22, 2005 Heh I rarely see Network OK (then again, I rarely look at the status bar xD) Link to comment Share on other sites More sharing options...
Firon Posted December 22, 2005 Report Share Posted December 22, 2005 Small swarms may take a while to show Network OK, especially if you got DHT off. Link to comment Share on other sites More sharing options...
ironboyzz Posted December 22, 2005 Author Report Share Posted December 22, 2005 Worse than that ... looking in logger, peers would connect, ask for a parts, attempt to send and disconnect>>>done. Nothing transmitted. As a test, cranked up Az (hated to) and seeding torrent works fine. So that should rule out a network issue.So I have something else going on! I shutdown firewall, Deleted .dat and reloaded them and same.With the Network OK NOT SHOWING, should/are transmits working?? Or have to wait for it?!?!Any Ideas? Not a novice at this and really stumped as to what/why this is happening and want UT running my torrents!!! TIA Link to comment Share on other sites More sharing options...
Firon Posted December 22, 2005 Report Share Posted December 22, 2005 Turn on peer.lazy_bitfield? Link to comment Share on other sites More sharing options...
ironboyzz Posted December 22, 2005 Author Report Share Posted December 22, 2005 That is one of my standard settings and always check that on updates! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.