Windows 7 speed problem

[kvendi]

Hello, i use Windows 7 ultimate, Utorrent 1.8.5 , Linksys wrt610n, my i-net tarif: 16Mb

Until recently, i had no any problem and now there is problem: utorrent won`t download more than 23kb/s, and thus stops sefing with browsers: browsers are no longer open the page.

[DreadWingKnight]

http://forum.utorrent.com/viewtopic.php?id=15992

[kvendi]

I used the FAQ and search, but I did not find anything on this probleme.Vot my utorrent settings

[DreadWingKnight]

Missing preferences - queueing

And it looks like you didn't even bother going through the connection setup guide even once yet.

Do that.

[kvendi]

Here is queueing and screen bandwich after using connection setup guide (problem persists)

[DreadWingKnight]

Link a speedtest result image please.

[kvendi]

http://speed-tester.info/modules/bar2/id49635.png

[DreadWingKnight]

That one is useless to me.

http://speedtest.net please

[kvendi]

http://www.speedtest.net/result/630476504.png

[DreadWingKnight]

http://forum.utorrent.com/viewtopic.php?id=58404 <-- start from these, lower queue settings until it stabalizes.

[kvendi]

I put the settings for even lower rates

but nothing has changed. After running utorrent speed...

But the speed test shows a sharp drop immediately and the page in the browser almost never open.

Here's the test when running utorrent

http://www.speedtest.net/result/630484270.png

[Switeck]

2nd link in my signature, 900 kilobit/sec upload settings or lower.

[kvendi]

I used it

I repeat: everything was great about the year 2. And after you install Windows 7 first, too, everything was fine, the problem began only recently and did not understand because of what. FireWall I do not use.

[Switeck]

At what point does upload speed stabilize at your set upload speed max?

[kvendi]

now its about 40, but but earlier this figure was about 1300

[Switeck]

Is that true even when only seeding in uTorrent?

[kvendi]

even when I do not download, internet is working very noticeably slower.

Problem solved: it was all because of the 2-nd version of the firmware WRT610n

[Switeck]

So what firmware you using on it now? (3rd party?)

[kvendi]

No, I have Linksys WRT610N rev.1

Recently, at the official site of the manufacturer came 2 nd version of the firmware. This will be updated. Now rolled back to the 1-th version of the firmware and everything works fine.