Archived

This topic is now archived and is closed to further replies.

Firon

µTorrent Server 3.0 alpha build 27079 (for Linux) - x86

Recommended Posts

@mcdonald

Thanks for the quick reply.

I would be looking fwd for that build.

I have also used qbittorrent (and measured the memory) and I thought it was too much. The shared I understand can be a lot, but the registered, to reach 300MB I personally think its too much. :)

For utserver process I see 173MB shared, 2K resident. :)

Since the new version (I updated I think Sat morning,) I see too much cpu usage. Now with 3 torrents idle, uses 94% of a core. I have forced my cpu's to low freq otherwise they work at full frequency. But I bet there will be a fix soon ;)

Cheers.

PS. I have ran few straces and lsof's to see why spins the cpu constantly, please let me know if would need any of these logs.

Share this post


Link to post
Share on other sites

thanks for this amazing client so far!!

question: like the windows client where the throttling can be selectively applied to UTP and protocol overhead, can the same options be changed for the server? because i'd like to throttle the normal traffic but not the utp traffic.

thanks!

Share this post


Link to post
Share on other sites

Probably under General. I'll make a sticky later and collect the packages people make. Eventually we'll probably make our own .deb, maybe rpm.
Then what about repository for provide updates using own Linux package managers? It's really will be nice :)

Share this post


Link to post
Share on other sites
thanks for this amazing client so far!!

question: like the windows client where the throttling can be selectively applied to UTP and protocol overhead, can the same options be changed for the server? because i'd like to throttle the normal traffic but not the utp traffic.

thanks!

found answer to this. in the advanced section.just check bt.ratelimit_tcp_only

Share this post


Link to post
Share on other sites

I have some 'figures' comparing utserver and rtorrent mem and cpu consumption.

Please notice the excessive CPU usage from utserver, and the exponatial difference in mem usage (Resident).

After 2-3 days of running utserver, I realised that I would prefer higher memory usage, than such a cpu cruncher... :(

USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND

t3ngu 14546 99.7 0.0 177316 2020 pts/3 Sl+ Sep18 3661:38 ./utserver

t3ngu 16217 0.3 0.7 162632 28976 pts/8 S+ Sep20 4:49 rtorrent

Notice please on strace log below, it takes almost a second for futex_wait_private, while in few seconds of tracing, there are so many get time, and get date calls...

strace:

0.000000 [ f76f6425] restart_syscall(<... resuming interrupted call ...>) = 0 <0.623719>

0.641303 [ f76f6425] futex(0xf43206ac, FUTEX_WAKE_PRIVATE, 1) = 0 <0.000027>

0.000263 [ f76f6425] futex(0x80f0008, FUTEX_WAIT_PRIVATE, 2, NULL) = -1 EAGAIN (Resource temporarily unavailable) <0.000029>

0.000284 [ f76f6425] futex(0x80f0008, FUTEX_WAKE_PRIVATE, 1) = 0 <0.000020>

0.000105 [ f76f6425] stat64("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2917, ...}) = 0 <0.000023>

0.000189 [ f76f6425] stat64("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2917, ...}) = 0 <0.000018>

0.000114 [ f7684e16] clock_gettime(CLOCK_MONOTONIC, {97632, 600539704}) = 0 <0.000017>

0.000101 [ f76f6425] gettimeofday({1284933925, 828857}, NULL) = 0 <0.000018>

0.000087 [ f76f6425] clock_gettime(CLOCK_REALTIME, {1284933925, 828945359}) = 0 <0.000018>

0.000092 [ f76f6425] futex(0xf43206c8, FUTEX_WAIT_PRIVATE, 192101, {59, 999911641}) = 0 <0.998708>

0.999125 [ f76f6425] futex(0xf43206ac, FUTEX_WAKE_PRIVATE, 1) = 0 <0.000044>

0.000277 [ f76f6425] futex(0x80f0008, FUTEX_WAIT_PRIVATE, 2, NULL) = -1 EAGAIN (Resource temporarily unavailable) <0.000020>

0.000127 [ f76f6425] futex(0x80f0008, FUTEX_WAIT_PRIVATE, 2, NULL) = -1 EAGAIN (Resource temporarily unavailable) <0.000019>

0.000097 [ f76f6425] futex(0x80f0008, FUTEX_WAIT_PRIVATE, 2, NULL) = -1 EAGAIN (Resource temporarily unavailable) <0.000018>

0.000092 [ f76f6425] futex(0x80f0008, FUTEX_WAIT_PRIVATE, 2, NULL) = -1 EAGAIN (Resource temporarily unavailable) <0.000018>

0.000090 [ f76f6425] futex(0x80f0008, FUTEX_WAIT_PRIVATE, 2, NULL) = -1 EAGAIN (Resource temporarily unavailable) <0.000018>

0.000090 [ f76f6425] futex(0x80f0008, FUTEX_WAKE_PRIVATE, 1) = 0 <0.000018>

0.000100 [ f76f6425] stat64("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2917, ...}) = 0 <0.000036>

0.000159 [ f76f6425] stat64("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2917, ...}) = 0 <0.000021>

0.000123 [ f7684e16] clock_gettime(CLOCK_MONOTONIC, {97633, 601100131}) = 0 <0.000018>

0.000097 [ f76f6425] gettimeofday({1284933926, 829414}, NULL) = 0 <0.000018>

0.000099 [ f76f6425] clock_gettime(CLOCK_REALTIME, {1284933926, 829519271}) = 0 <0.000019>

0.000098 [ f76f6425] futex(0xf43206c8, FUTEX_WAIT_PRIVATE, 192103, {59, 999894729}) = 0 <0.998127>

0.998388 [ f76f6425] futex(0xf43206ac, FUTEX_WAKE_PRIVATE, 1) = 0 <0.000033>

Share this post


Link to post
Share on other sites

I love that there is finally development of a linux version of utorrent. The utserver is almost exactly what I'm after. Unfortunately, until there is an RSS downloader implemented, I'm stuck using Torrentflux-B4RT, but I will stay tuned for updates!

Share this post


Link to post
Share on other sites

Great! Thank you very much for Linux version!

Please will you provide builds for ARM CPUs (mainly for NAS servers like QNAP)? I think there is a lot of users (including me) running embedded systems with Linux on ARM architecture which will be eager to run uTorrent there.

Share this post


Link to post
Share on other sites
Thank you very much for this daemon !

Any thread for enthusiasts troubleshooting ?

I just added two new forums' date=' one for general discussion and another for troubleshooting.

[url']http://forum.utorrent.com/viewforum.php?id=40 - General

http://forum.utorrent.com/viewforum.php?id=38 - Troubleshooting

I know I'm late to the ball game, been far away.

But just wish to sincerely thank the uTorrent team for this linux version.

Share this post


Link to post
Share on other sites

Hi.. thank you for this great daemon :). I have some question, when i run utserver on my vps, it's take a much a cpu resource. anyone got same condition with me?

  PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND21985 fals      15   0  301m 167m 1384 S 100.9 21.3  39:41.72 utserver

Share this post


Link to post
Share on other sites
Hi.. thank you for this great daemon :). I have some question, when i run utserver on my vps, it's take a much a cpu resource. anyone got same condition with me?
  PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND

21985 fals 15 0 301m 167m 1384 S 100.9 21.3 39:41.72 utserver

Are you running on a 64-bit LInux? That could be a problem. What is a "vps"?

Share this post


Link to post
Share on other sites
Hi.. thank you for this great daemon :). I have some question' date=' when i run utserver on my vps, it's take a much a cpu resource. anyone got same condition with me?
  PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND

21985 fals 15 0 301m 167m 1384 S 100.9 21.3 39:41.72 utserver

[/quote']

Are you running on a 64-bit LInux? That could be a problem. What is a "vps"?

Hi, I'm running Ubuntu 32-bit

Share this post


Link to post
Share on other sites

Hello - I'm a long time mac client user and "forum lurker"

Just wanted to give the feedback that I've been running this linux implementation since it was released on my Debian based NAS. It's working very, very well for me - fast, rock solid, low resource usage (essential on my NAS)... For an 'alpha' release, very impressive and I look forward to seeing it develop

Many thanks to the dev's for providing this

Share this post


Link to post
Share on other sites
I love that there is finally development of a linux version of utorrent. The utserver is almost exactly what I'm after. Unfortunately, until there is an RSS downloader implemented, I'm stuck using Torrentflux-B4RT, but I will stay tuned for updates!

You can configure Automatic to work with uTorrent - a pretty good interim option.

Share this post


Link to post
Share on other sites

Thank you so much!! We are waiting for a stable version! And the opportunity to select a folder to download. Even the GUI is not so much needed)))

Огромное вам спасибо!!!! Ждем стабильную версию!!! И возможность выбора папки куда качать. Даже ГУЙ(:)) не так сильно нужен)))

Share this post


Link to post
Share on other sites
I love that there is finally development of a linux version of utorrent. The utserver is almost exactly what I'm after. Unfortunately, until there is an RSS downloader implemented, I'm stuck using Torrentflux-B4RT, but I will stay tuned for updates!

the RSS downloader is already implemented, but it is only accessible through the Web API

http://forum.utorrent.com/viewtopic.php?id=85202

I have already set up my feeds in utserver. It takes some time to figure out the syntax but once you configure a feed and a filter it turns out to be really simple

Share this post


Link to post
Share on other sites

Still a problem when a lot of torrent files, it still does not display, processor and lots of eats

Еще проблема, когда в торренте много файлов, он все не отображает, и проц много кушает

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.