Jump to content

UPnP in 1.6 not working for you? Post here


Firon

Recommended Posts

Okay, everyone keep all this UPnP stuff to one thread.

Post the EXACT messages from the Logger, and if you can access the XML file from your browser, please save it and upload it somewhere, then link here. If you can't do that, then paste it here into a code box. Failing that, e-mail me the XML file, along with the Logger messages. firon@utorrent.com

Big note before reporting anything:

MAKE SURE DMZ IS NOT TURNED ON FOR YOU. MAKE SURE THE PORT IS NOT ALREADY FORWARDED!

And make sure your router actually SUPPORTS UPnP, and that UPnP is turned on. If you ONLY see Unable to map UPnP Port in the Logger, this may be the case.

Link to comment
Share on other sites

  • Replies 299
  • Created
  • Last Reply

I get this when I start 462

[18:19:26]  Connecting to http://192.168.1.1:5678/rootDesc.xml

[18:19:26] 0: urn:schemas-upnp-org:service:WANIPConnection:1

[18:19:26] 1: http://192.168.1.1:2468//WANIPConnection

[18:19:26] 2: /WANIPConnection

[18:19:26] 3: /WANIPCn.xml

[18:19:26] 4:

[18:19:26] 5: http://192.168.1.1:5678

[18:19:26] UPnP: Discovered new device: http://192.168.1.1:2468//WANIPConnection
[18:19:26] <?xml version="1.0"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><SOAP-ENV:Body><m:GetGenericPortMappingEntryResponse xmlns:m="urn:schemas-upnp-org:service:WANIPConnection:1"><NewRemoteHost xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:dt="string"></NewRemoteHost><NewExternalPort xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:dt="ui2">21</NewExternalPort><NewProtocol xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:dt="string">TCP</NewProtocol><NewInternalPort xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:dt="ui2">21</NewInternalPort><NewInternalClient xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:dt="string">192.168.1.0</NewInternalClient><NewEnabled xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:dt="boolean">0</NewEnabled><NewPortMappingDescription xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:dt="string">FTP</NewPortMappingDescription><NewLeaseDuration xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:dt="ui4">0</NewLeaseDuration></m:GetGenericPortMappingEntryResponse></SOAP-ENV:Body></SOAP-ENV:Envelope>


[18:19:29] <?xml version="1.0"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><SOAP-ENV:Body><m:AddPortMappingResponse xmlns:m="urn:schemas-upnp-org:service:WANIPConnection:1"/></SOAP-ENV:Body></SOAP-ENV:Envelope>


[18:19:29] UPnP: ERROR -1 mapping port 28249 -> 192.168.1.100:28249
[18:19:40] Unable to map UPnP Port.

Even though it says it cant map the port, the port is forwarded when I log into the UPnP Section under network connections. I have a BEFSR11 running firmware 1.45.7, Jul 31 2003

WHATS IN THE XML FILE:

- <html>
<head />
- <body>
- <root>
- <specversion>
<major>1</major>
<minor>0</minor>
</specversion>
<urlbase>http://192.168.1.1:5678</urlbase>
- <device>
<devicetype>urn:schemas-upnp-org:device:InternetGatewayDevice:1</devicetype>
<presentationurl>/index.htm</presentationurl>
<friendlyname>Linksys BEFSR41/BEFSR11/BEFSRU31</friendlyname>
<manufacturer>Linksys Inc.</manufacturer>
<manufacturerurl>http://www.linksys.com</manufacturerurl>
<modeldescription>Internet Access Server</modeldescription>
<modelname>Linksys BEFSR41/BEFSR11/BEFSRU31</modelname>
<udn>uuid:upnp-InternetGatewayDevice-1_0-0090a2777777</udn>
<upc>00000-00001</upc>
- <iconlist>
- <icon>
<mimetype>image/gif</mimetype>
<width>16</width>
<height>16</height>
<depth>8</depth>
<url>http://192.168.1.1/calc.gif</url>
</icon>
</iconlist>
- <servicelist>
- <service>
<servicetype>urn:schemas-upnp-org:service:Layer3Forwarding:1</servicetype>
<serviceid>urn:upnp-org:serviceId:L3Forwarding1</serviceid>
<controlurl>/Layer3Forwarding</controlurl>
<eventsuburl>/Layer3Forwarding</eventsuburl>
<scpdurl>/Layer3Forwarding.xml</scpdurl>
</service>
</servicelist>
- <devicelist>
- <device>
<devicetype>urn:schemas-upnp-org:device:WANDevice:1</devicetype>
<friendlyname>WANDevice</friendlyname>
<manufacturer>Linksys Inc.</manufacturer>
<manufacturerurl>http://www.linksys.com</manufacturerurl>
<modeldescription>BROADBAND ROUTER</modeldescription>
<modelname>Linksys BEFSR41/BEFSR11/BEFSRU31</modelname>
<modelnumber>1</modelnumber>
<modelurl>http://www.linksys.com</modelurl>
<serialnumber>0000001</serialnumber>
<udn>uuid:upnp-WANDevice-1_0-0090a2777777</udn>
<upc>00000-00001</upc>
- <servicelist>
- <service>
<servicetype>urn:schemas-upnp-org:service:WANCommonInterfaceConfig:1</servicetype>
<serviceid>urn:upnp-org:serviceId:WANCommonInterfaceConfig</serviceid>
<controlurl>http://192.168.1.1:6688/WANCommonInterfaceConfig</controlurl>
<eventsuburl>/WANCommonInterfaceConfig</eventsuburl>
<scpdurl>/WANCfg.xml</scpdurl>
</service>
</servicelist>
- <devicelist>
- <device>
<devicetype>urn:schemas-upnp-org:device:WANConnectionDevice:1</devicetype>
<friendlyname>Internet Access Server</friendlyname>
<manufacturer>Linksys Inc.</manufacturer>
<manufacturerurl>http://www.linksys.com</manufacturerurl>
<modeldescription>BROADBAND ROUTER</modeldescription>
<modelname>Linksys BEFSR41/BEFSR11/BEFSRU31</modelname>
<modelnumber>1</modelnumber>
<modelurl>http://www.linksys.com</modelurl>
<serialnumber>0000001</serialnumber>
<udn>uuid:upnp-WANConnectionDevice-1_0-0090a2777777</udn>
<upc>00000-00001</upc>
- <servicelist>
- <service>
<servicetype>urn:schemas-upnp-org:service:WANIPConnection:1</servicetype>
<serviceid>urn:upnp-org:serviceId:WANIPConnection</serviceid>
<controlurl>http://192.168.1.1:2468//WANIPConnection</controlurl>
<eventsuburl>/WANIPConnection</eventsuburl>
<scpdurl>/WANIPCn.xml</scpdurl>
</service>
</servicelist>
</device>
</devicelist>
</device>
</devicelist>
</device>
</root>
</body>
</html>

LINK TO XML FILE

(IT MIGHT SAY 404 BUT JUST MANUALLY COPY AND PASTE THE URL AGAIN AND IT WILL LOAD)

Link to comment
Share on other sites

yes yes, i know it's a crappy router, but this is what i'm stuck with - DI-524 - and here's my error:

[22:22:43]  Connecting to http://192.168.0.1:5678/igd.xml
[22:22:45] 0: urn:schemas-upnp-org:service:WANIPConnection:1
[22:22:45] 1: /WANIPConnection
[22:22:45] 2: /WANIPConnection
[22:22:45] 3: /WANIPConnection.xml
[22:22:45] 4:
[22:22:45] 5: http://192.168.0.1:5678
[22:22:45] UPnP: Discovered new device: http://192.168.0.1:5678/WANIPConnection
[22:22:46] <?xml version="1.0"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><SOAP-ENV:Body>
<m:GetGenericPortMappingEntryResponse xmlns:m="urn:schemas-upnp-org:service:WANIPConnection:1"><NewRemoteHost xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:dt="string"></NewRemoteHost><NewExternalPort xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:dt="ui2">8579</NewExternalPort><NewProtocol xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:dt="string">UDP</NewProtocol><NewInternalPort xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:dt="ui2">8579</NewInternalPort><NewInternalClient xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:dt="string">192.168.0.102</NewInternalClient><NewEnabled xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:dt="boolean">1</NewEnabled><NewPortMappingDescription xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:dt="string">BitComet (192.168.0.102:8579) 8579</NewPortMappingDescription><NewLeaseDuration xmlns:dt="urn:schemas-microsoft-com:datatypes" dt:dt="ui4">0</NewLeaseDuration></m:GetGenericPortMappingEntryResponse></SOAP-ENV:Body> </SOAP-ENV:Envelope>
[22:22:47] <?xml version="1.0"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><SOAP-ENV:Body>
<m:AddPortMappingResponse xmlns:m="urn:schemas-upnp-org:service:WANIPConnection:1"></m:AddPortMappingResponse></SOAP-ENV:Body> </SOAP-ENV:Envelope>
[22:22:47] UPnP: ERROR -1 mapping port 49251 -> 192.168.0.100:49251
[22:22:57] Unable to map UPnP Port.

and here's that igd.xml file:

  <?xml version="1.0" ?> 
- <root xmlns="urn:schemas-upnp-org:device-1-0">
- <specVersion>
<major>1</major>
<minor>0</minor>
</specVersion>
<URLBase>http://192.168.0.1:5678</URLBase>
- <device>
<deviceType>urn:schemas-upnp-org:device:InternetGatewayDevice:1</deviceType>
<presentationURL>http://192.168.0.1:80</presentationURL>
<friendlyName>D-Link Router</friendlyName>
<manufacturer>D-Link</manufacturer>
<manufacturerURL>http://www.dlink.com</manufacturerURL>
<modelDescription>Internet Access Router</modelDescription>
<modelName>D-Link Router</modelName>
<UDN>uuid:upnp-InternetGatewayDevice-1_0-12345678900001</UDN>
<UPC>123456789001</UPC>
- <serviceList>
- <service>
<serviceType>urn:schemas-upnp-org:service:Layer3Forwarding:1</serviceType>
<serviceId>urn:upnp-org:serviceId:L3Forwarding1</serviceId>
<controlURL>/Layer3Forwarding</controlURL>
<eventSubURL>/Layer3Forwarding</eventSubURL>
<SCPDURL>/Layer3Forwarding.xml</SCPDURL>
</service>
</serviceList>
- <deviceList>
- <device>
<deviceType>urn:schemas-upnp-org:device:WANDevice:1</deviceType>
<friendlyName>WANDevice</friendlyName>
<manufacturer>D-Link</manufacturer>
<manufacturerURL>http://www.dlink.com</manufacturerURL>
<modelDescription>Internet Access Router</modelDescription>
<modelName>D-Link Router</modelName>
<modelNumber>1</modelNumber>
<modelURL>http://support.dlink.com</modelURL>
<serialNumber>12345678900001</serialNumber>
<UDN>uuid:upnp-WANDevice-1_0-12345678900001</UDN>
<UPC>123456789001</UPC>
- <serviceList>
- <service>
<serviceType>urn:schemas-upnp-org:service:WANCommonInterfaceConfig:1</serviceType>
<serviceId>urn:upnp-org:serviceId:WANCommonInterfaceConfig</serviceId>
<controlURL>/WANCommonInterfaceConfig</controlURL>
<eventSubURL>/WANCommonInterfaceConfig</eventSubURL>
<SCPDURL>/WANCommonInterfaceConfig.xml</SCPDURL>
</service>
</serviceList>
- <deviceList>
- <device>
<deviceType>urn:schemas-upnp-org:device:WANConnectionDevice:1</deviceType>
<friendlyName>WAN Connection Device</friendlyName>
<manufacturer>D-Link</manufacturer>
<manufacturerURL>http://www.dlink.com</manufacturerURL>
<modelDescription>Internet Access Router</modelDescription>
<modelName>D-Link Router</modelName>
<modelNumber>1</modelNumber>
<modelURL>http://support.dlink.com</modelURL>
<serialNumber>12345678900001</serialNumber>
<UDN>uuid:upnp-WANConnectionDevice-1_0-12345678900001</UDN>
<UPC>123456789001</UPC>
- <serviceList>
- <service>
<serviceType>urn:schemas-upnp-org:service:WANIPConnection:1</serviceType>
<serviceId>urn:upnp-org:serviceId:WANIPConnection</serviceId>
<controlURL>/WANIPConnection</controlURL>
<eventSubURL>/WANIPConnection</eventSubURL>
<SCPDURL>/WANIPConnection.xml</SCPDURL>
</service>
</serviceList>
</device>
</deviceList>
</device>
</deviceList>
</device>
</root>

a yes, i forgot to mention that i'm running firmware 1.21 and i have hardware revision A2.

Link to comment
Share on other sites

[21:24:42]  Didn't find any XML information!

[21:34:43] Connecting to http://192.168.1.***:****/cameradesc.xml

[21:34:45] Connecting to http://192.168.1.***:****/IGatewayDeviceDescDoc

[21:34:45] 0: urn:schemas-upnp-org:service:WANIPConnection:1

[21:34:45] 1: /WANIPConnCtrlUrl

[21:34:45] 2: /WANIPConnEvtUrl

[21:34:45] 3: /WanIPConnectionDescDoc

[21:34:45] 4:

[21:34:45] 5:

[21:34:45] <s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body>
<u:GetGenericPortMappingEntryResponse xmlns:u="urn:schemas-upnp-org:service:WANIPConnection:1">
<NewRemoteHost></NewRemoteHost>
<NewExternalPort>50000</NewExternalPort>
<NewProtocol>TCP</NewProtocol>
<NewInternalPort>50000</NewInternalPort>
<NewInternalClient>192.168.1.***</NewInternalClient>
<NewEnabled>1</NewEnabled>
<NewPortMappingDescription>IPCamera(192.168.1.***: Ex:50000 In:50000)</NewPortMappingDescription>
<NewLeaseDuration>0</NewLeaseDuration>
</u:GetGenericPortMappingEntryResponse>
</s:Body></s:Envelope>



[21:34:45] <s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body>
<u:GetGenericPortMappingEntryResponse xmlns:u="urn:schemas-upnp-org:service:WANIPConnection:1">
<NewRemoteHost></NewRemoteHost>
<NewExternalPort>44567</NewExternalPort>
<NewProtocol>TCP</NewProtocol>
<NewInternalPort>44567</NewInternalPort>
<NewInternalClient>192.168.1.***</NewInternalClient>
<NewEnabled>1</NewEnabled>
<NewPortMappingDescription>utorrent</NewPortMappingDescription>
<NewLeaseDuration>0</NewLeaseDuration>
</u:GetGenericPortMappingEntryResponse>
</s:Body></s:Envelope>



[21:34:45] <s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><s:Body><s:Fault><faultcode>s:Client</faultcode><faultstring>UPnPError</faultstring><detail><UPnPError xmlns="urn:schemas-upnp-org:control-1-0"><errorCode>713</errorCode><errorDescription>
SpecifiedArrayIndexInvalid</errorDescription></UPnPError></detail></s:Fault></s:Body></s:Envelope>

Link to comment
Share on other sites

And um, you don't need to censor the IP. It's a local IP, no one outside your network can access it.

Also, big note before reporting anything:

MAKE SURE DMZ IS NOT TURNED ON FOR YOU. MAKE SURE THE PORT IS NOT ALREADY FORWARDED!

Link to comment
Share on other sites

http://forum.utorrent.com/viewtopic.php?pid=184235#p184235

 <?xml version="1.0" ?> 
- <root xmlns="urn:schemas-upnp-org:device-1-0">
- <specVersion>
<major>1</major>
<minor>0</minor>
</specVersion>
<URLBase>http://192.168.2.138</URLBase>
- <device>
<deviceType>urn:schemas-upnp-org:device:InternetGatewayDevice:1</deviceType>
<friendlyName>SpeedTouch 510 (0404FGKC2)</friendlyName>
<manufacturer>THOMSON</manufacturer>
<manufacturerURL>http://www.thomson.net</manufacturerURL>
<modelDescription>DSL Internet Gateway Device</modelDescription>
<modelName>SpeedTouch</modelName>
<modelNumber>510</modelNumber>
<modelURL>http://www.speedtouch.com</modelURL>
<serialNumber>0404FGKC2</serialNumber>
<UDN>uuid:UPnP-SpeedTouch510-1_00-90-D0-CC-51-42</UDN>
<presentationURL>/</presentationURL>
- <serviceList>
- <service>
<serviceType>urn:schemas-upnp-org:service:Layer3Forwarding:1</serviceType>
<serviceId>urn:upnp-org:serviceId:layer3f</serviceId>
<controlURL>/upnp/control/layer3f</controlURL>
<eventSubURL>/upnp/event/layer3f</eventSubURL>
<SCPDURL>/upnp/Layer3Forwarding.xml</SCPDURL>
</service>
</serviceList>
- <deviceList>
- <device>
<deviceType>urn:schemas-upnp-org:device:LANDevice:1</deviceType>
<friendlyName>LANDevice</friendlyName>
<manufacturer>THOMSON</manufacturer>
<modelName>SpeedTouch</modelName>
<serialNumber>0404FGKC2</serialNumber>
<UDN>uuid:UPnP-SpeedTouch510-1_00-90-D0-CC-51-42_LD</UDN>
- <serviceList>
- <service>
<serviceType>urn:schemas-upnp-org:service:LANHostConfigManagement:1</serviceType>
<serviceId>urn:upnp-org:serviceId:lanhcm</serviceId>
<controlURL>/upnp/control/lanhcm</controlURL>
<eventSubURL>/upnp/event/lanhcm</eventSubURL>
<SCPDURL>/upnp/LANHostConfigManagement.xml</SCPDURL>
</service>
</serviceList>
</device>
- <device>
<deviceType>urn:schemas-upnp-org:device:WANDevice:1</deviceType>
<friendlyName>WANDevice</friendlyName>
<manufacturer>THOMSON</manufacturer>
<modelName>SpeedTouch</modelName>
<serialNumber>0404FGKC2</serialNumber>
<UDN>uuid:UPnP-SpeedTouch510-1_00-90-D0-CC-51-42_WD</UDN>
- <serviceList>
- <service>
<serviceType>urn:schemas-upnp-org:service:WANCommonInterfaceConfig:1</serviceType>
<serviceId>urn:upnp-org:serviceId:wancic</serviceId>
<controlURL>/upnp/control/wancic</controlURL>
<eventSubURL>/upnp/event/wancic</eventSubURL>
<SCPDURL>/upnp/WANCommonInterfaceConfig.xml</SCPDURL>
</service>
</serviceList>
- <deviceList>
- <device>
<deviceType>urn:schemas-upnp-org:device:WANConnectionDevice:1</deviceType>
<friendlyName>WANConnectionDevice</friendlyName>
<manufacturer>THOMSON</manufacturer>
<modelName>SpeedTouch</modelName>
<serialNumber>0404FGKC2</serialNumber>
<UDN>uuid:UPnP-SpeedTouch510-1_00-90-D0-CC-51-42_WCDRELAY</UDN>
- <serviceList>
- <service>
<serviceType>urn:schemas-upnp-org:service:WANDSLLinkConfig:1</serviceType>
<serviceId>urn:upnp-org:serviceId:wandsllc:RELAY</serviceId>
<controlURL>/upnp/control/wandsllcRELAY</controlURL>
<eventSubURL>/upnp/event/wandsllcRELAY</eventSubURL>
<SCPDURL>/upnp/WANDSLLinkConfig.xml</SCPDURL>
</service>
- <service>
<serviceType>urn:schemas-upnp-org:service:WANPPPConnection:1</serviceType>
<serviceId>urn:upnp-org:serviceId:wanpppc:Internet</serviceId>
<controlURL>/upnp/control/wanpppcInternet</controlURL>
<eventSubURL>/upnp/event/wanpppcInternet</eventSubURL>
<SCPDURL>/upnp/WANPPPConnection.xml</SCPDURL>
</service>
</serviceList>
</device>
</deviceList>
</device>
</deviceList>
</device>
</root>

maybe after solving these uPnP problems, ludde will know enough on XML to go ahead with the RSS parsing problems... :P

Link to comment
Share on other sites

On some routers (like mine - Alcatel 510) you have to enabled uPnP. Firon, I suggest you note this in your first message.

BTW - can you tell from the log messages if it was enabled or not , inaccessible, or XML parsing problem ?

Link to comment
Share on other sites

Speedtouch 716v5 WL

[22:24:40]  Connecting to http://192.168.1.254:80/upnp/IGD.xml
[22:24:40] Didn't find any XML information!
[22:24:51] Unable to map UPnP Port.

XML file is browsable in webbrowser as follows

    <root>

<specVersion>
<major>1</major>
<minor>0</minor>
</specVersion>
<URLBase>http://192.168.1.254:80</URLBase>

<device>

<deviceType>
urn:schemas-upnp-org:device:InternetGatewayDevice:1
</deviceType>
<friendlyName>SpeedTouch 716 (0528JTGZ6)</friendlyName>
<manufacturer>THOMSON</manufacturer>
<manufacturerURL>http://www.thomson.net</manufacturerURL>
<modelDescription>DSL Voice Gateway Device</modelDescription>
<modelName>SpeedTouch</modelName>
<modelNumber>716v5</modelNumber>
<modelURL>http://www.speedtouch.com</modelURL>
<serialNumber>0528JTGZ6</serialNumber>
<UDN>uuid:UPnP_SpeedTouch716v5-1_00-14-7F-01-BB-50</UDN>
<presentationURL>/</presentationURL>

<serviceList>

<service>
<serviceType>urn:schemas-upnp-org:service:Layer3Forwarding:1</serviceType>
<serviceId>urn:upnp-org:serviceId:layer3f</serviceId>
<controlURL>/upnp/control/igd/layer3f</controlURL>
<eventSubURL>/upnp/event/igd/layer3f</eventSubURL>
<SCPDURL>/upnp/Layer3Forwarding.xml</SCPDURL>
</service>
</serviceList>

<deviceList>

<device>
<deviceType>urn:schemas-upnp-org:device:WANDevice:1</deviceType>
<friendlyName>WANDevice</friendlyName>
<manufacturer>THOMSON</manufacturer>
<modelName>SpeedTouch</modelName>
<serialNumber>0528JTGZ6</serialNumber>
<UDN>uuid:UPnP_SpeedTouch716v5-1_00-14-7F-01-BB-50_WD</UDN>

<serviceList>

<service>

<serviceType>
urn:schemas-upnp-org:service:WANCommonInterfaceConfig:1
</serviceType>
<serviceId>urn:upnp-org:serviceId:wancic</serviceId>
<controlURL>/upnp/control/igd/wancic</controlURL>
<eventSubURL>/upnp/event/igd/wancic</eventSubURL>
<SCPDURL>/upnp/WANCommonInterfaceConfig.xml</SCPDURL>
</service>
</serviceList>

<deviceList>

<device>
<deviceType>urn:schemas-upnp-org:device:WANConnectionDevice:1</deviceType>
<friendlyName>WANConnectionDevice</friendlyName>
<manufacturer>THOMSON</manufacturer>
<modelName>SpeedTouch</modelName>
<serialNumber>0528JTGZ6</serialNumber>

<UDN>
uuid:UPnP_SpeedTouch716v5-1_00-14-7F-01-BB-50_WCDatm_Internet
</UDN>

<serviceList>

<service>
<serviceType>urn:schemas-upnp-org:service:WANDSLLinkConfig:1</serviceType>
<serviceId>urn:upnp-org:serviceId:wandsllc:atm_Internet</serviceId>
<controlURL>/upnp/control/igd/wandsllcatm_Internet</controlURL>
<eventSubURL>/upnp/event/igd/wandsllcatm_Internet</eventSubURL>
<SCPDURL>/upnp/WANDSLLinkConfig.xml</SCPDURL>
</service>

<service>
<serviceType>urn:schemas-upnp-org:service:WANPPPConnection:1</serviceType>
<serviceId>urn:upnp-org:serviceId:wanpppc:Internet</serviceId>
<controlURL>/upnp/control/igd/wanpppcInternet</controlURL>
<eventSubURL>/upnp/event/igd/wanpppcInternet</eventSubURL>
<SCPDURL>/upnp/WANPPPConnection.xml</SCPDURL>
</service>
</serviceList>
</device>
</deviceList>
</device>
</deviceList>
</device>
</root>

Link to comment
Share on other sites

Hi im new to utorrent, ive only been using it for a couple days, and its great...a huge change from azureus...everything seems to be working properly, except for this one error i keep getting.

It says

Connecting to http://192.168.0.1/devicedesc.xml

didn't find any Xml information!

it does it every 10 minutes.

the thing is...i dont have a router, and i dont use a firewall.

im hooked straight into my dsl modem. Its a Speedstream 5100

Link to comment
Share on other sites

Mine says that the port is forwarded but it really isn't as I end up getting a Red light at the bottom, when I usually get a green light when I manually forward my connection.

Routers XML file

-<root>
−<specVersion>
<major>1</major>
<minor>0</minor>
</specVersion>
−<device>
−<deviceType>
urn:schemas-upnp-org:device:InternetGatewayDevice:1
</deviceType>
<friendlyName>UNEX (DSL)</friendlyName>
<manufacturer>Unex Technology Corporation.</manufacturer>
<modelDescription>Internet Gateway Device for DSL</modelDescription>
<modelName>UNEX</modelName>
<modelNumber>12345XYZ001</modelNumber>
<serialNumber>00000222</serialNumber>
<UDN>uuid:5825F8BA-75D2-a1a2-BAA2-0FEA7BC5D05D</UDN>
<UPC/>
−<serviceList>
−<service>
<serviceType>urn:schemas-upnp-org:service:Layer3Forwarding:1</serviceType>
<serviceId>urn:upnp-org:serviceId:L3Forwarding1</serviceId>
<SCPDURL>/L3Fwd.xml</SCPDURL>
<controlURL>/UD/?0</controlURL>
<eventSubURL>/?0</eventSubURL>
</service>
</serviceList>
−<deviceList>
−<device>
<deviceType>urn:schemas-upnp-org:device:WANDevice:1</deviceType>
<friendlyName>WAN Device Sample</friendlyName>
<manufacturer>Allegro Software Development Corp</manufacturer>
<modelName>WAN Device</modelName>
<UDN>uuid:04BBE68A-A736-a1a2-ADA6-BB53E815220A</UDN>
<UPC/>
−<serviceList>
−<service>
−<serviceType>
urn:schemas-upnp-org:service:WANCommonInterfaceConfig:1
</serviceType>
<serviceId>urn:upnp-org:serviceId:WANCommonInterfaceConfig</serviceId>
<SCPDURL>/WanCommonIfc1.xml</SCPDURL>
<controlURL>/UD/?1</controlURL>
<eventSubURL>/?1</eventSubURL>
</service>
</serviceList>
−<deviceList>
−<device>
<deviceType>urn:schemas-upnp-org:device:WANConnectionDevice:1</deviceType>
<friendlyName>WAN Connection Device</friendlyName>
<manufacturer>Allegro Software Development Corp</manufacturer>
<modelName>WAN Connection Device</modelName>
<UDN>uuid:71338B9E-a1a5-41af-A755-A103507F5F50</UDN>
<UPC/>
−<serviceList>
−<service>
<serviceType>urn:schemas-upnp-org:service:WANDSLLinkConfig:1</serviceType>
<serviceId>urn:upnp-org:serviceId:WANDSLLinkC1</serviceId>
<SCPDURL>/WanLink.xml</SCPDURL>
<controlURL>/UD/?2</controlURL>
<eventSubURL>/?2</eventSubURL>
</service>
−<service>
<serviceType>urn:schemas-upnp-org:service:WANPPPConnection:1</serviceType>
<serviceId>urn:upnp-org:serviceId:WANPPPConn1</serviceId>
<SCPDURL>/WanPppConn.xml</SCPDURL>
<controlURL>/UD/?3</controlURL>
<eventSubURL>/?3</eventSubURL>
</service>
−<service>
<serviceType>urn:schemas-upnp-org:service:WANIPConnection:1</serviceType>
<serviceId>urn:upnp-org:serviceId:WANIPConnection</serviceId>
<SCPDURL>/WanIpConn.xml</SCPDURL>
<controlURL>/UD/?4</controlURL>
<eventSubURL>/?4</eventSubURL>
</service>
</serviceList>
</device>
</deviceList>
</device>
−<device>
<deviceType>urn:schemas-upnp-org:device:LANDevice:1</deviceType>
<friendlyName>Lan Device sample</friendlyName>
<manufacturer>Allegro Software Development Corp</manufacturer>
<modelName>Lan Device</modelName>
<UDN>uuid:DDC87800-1296-a1a5-96D4-D10C4E2174B1</UDN>
<UPC/>
−<serviceList>
−<service>
−<serviceType>
urn:schemas-upnp-org:service:LANHostConfigManagement:1
</serviceType>
<serviceId>urn:upnp-org:serviceId:LANHostCfg1</serviceId>
<SCPDURL>/LanHostCfgMgmt.xml</SCPDURL>
<controlURL>/UD/?5</controlURL>
<eventSubURL/>
</service>
</serviceList>
</device>
</deviceList>
<presentationURL>/</presentationURL>
</device>
</root>

uTorrent Log

[02:41:35]  Connecting to http://192.168.62.1:80/DeviceDescription.xml

[02:41:35] 0: urn:schemas-upnp-org:service:WANIPConnection:1

[02:41:35] 1: /UD/?4

[02:41:35] 2: /?4

[02:41:35] 3: /WanIpConn.xml

[02:41:35] 4:

[02:41:35] 5:

[02:41:35] UPnP: Discovered new device: http://192.168.62.1:80/UD/?4
[02:41:35] <s:Envelope
xmlns:s="http://schemas.xmlsoap.org/soap/envelope/"
s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<s:Body>
<u:GetGenericPortMappingEntryResponse xmlns:u="urn:schemas-upnp-org:service:WANIPConnection:1">
<NewRemoteHost></NewRemoteHost>
<NewExternalPort>0</NewExternalPort>
<NewProtocol></NewProtocol>
<NewInternalPort>0</NewInternalPort>
<NewInternalClient></NewInternalClient>
<NewEnabled>0</NewEnabled>
<NewPortMappingDescription></NewPortMappingDescription>
<NewLeaseDuration>1835823983</NewLeaseDuration>
</u:GetGenericPortMappingEntryResponse>
</s:Body>
</s:Envelope>


[02:41:36] <s:Envelope
xmlns:s="http://schemas.xmlsoap.org/soap/envelope/"
s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<s:Body>
<u:AddPortMappingResponse xmlns:u="urn:schemas-upnp-org:service:WANIPConnection:1">
</u:AddPortMappingResponse>
</s:Body>
</s:Envelope>


[02:41:36] UPnP: Mapped port 9155 -> 192.168.62.100:9155

The XML encoding for my Router is in UTF-8, but uTorrent seems to have an interpretation problem as it shows boxes in the Log, boxes which disappeared when I copied and pasted to Notepad. They look like this '[][]',but more like a complete box ... hope that helps.

EDIT: Made the Router XML syntax more readable as copy and pasting makes a lot lost in translation. You can download the XML file here as well.

Router XML

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.


×
×
  • Create New...