AstraP750 Posted August 14, 2008 Report Share Posted August 14, 2008 HelloI have a problem with the new uTorrent 1.8I have an SMC WBR14-G2 router and it freeze out when uTorrent 1.8 starts and get some peers.I opened port for the uTorrent in NAT and it worked perfect in 1.7.7.Anyone can help me? Link to comment Share on other sites More sharing options...
emc Posted August 14, 2008 Report Share Posted August 14, 2008 Minor GUI bug of build 11813.The field "Enable NAT-PMP port mapping" (on mouse over) overlaped with checkbox of "Add Windows Firewall exception". Link to comment Share on other sites More sharing options...
rafi Posted August 14, 2008 Report Share Posted August 14, 2008 acbdu :i just had to register to view my point theres two things i dont like about version 1.8.. first is the "new" interface although not much have change im not too keen about the left frame reaching from top to bottom, it was half in version 1.7 and the second thing is i dont like the tracker tab it was better when you had the tracker status under general tabtry: pref.->advanced->gui.tall_category_list = false Link to comment Share on other sites More sharing options...
mataku Posted August 14, 2008 Report Share Posted August 14, 2008 have a problem, when I am clicking check updates is jumping out for me "cannot unite with the server" what to do?EDIT:I am trying as many as 6 hours and still the one am mistake, was active in a previous version, without the problem. When will it be well? Link to comment Share on other sites More sharing options...
acbdu Posted August 14, 2008 Report Share Posted August 14, 2008 rafi thx for that Link to comment Share on other sites More sharing options...
rafi Posted August 14, 2008 Report Share Posted August 14, 2008 np Link to comment Share on other sites More sharing options...
mataku Posted August 14, 2008 Report Share Posted August 14, 2008 I have a problem, when I am clicking check updates is jumping out for me "cannot unite with the server" what to do?Firon:The server might just be overloaded, so either update manually or try again.Mataku:I am trying as many as 6 hours and still the one am mistake, was active in a previous version, without the problem. When will it be well?Please help Link to comment Share on other sites More sharing options...
Chryss Posted August 14, 2008 Report Share Posted August 14, 2008 Congratulations and thank you so much for all your hard work! Link to comment Share on other sites More sharing options...
Chastity Posted August 14, 2008 Report Share Posted August 14, 2008 @matakuJust go to the homepage and download 1.8 stable from there. Work just fine, I just checked. Link to comment Share on other sites More sharing options...
mataku Posted August 14, 2008 Report Share Posted August 14, 2008 But for me the 1.7 version was updated oneself to the 1.8 version and suddenly this mistake, rather taking and installing the inside out one more time won't help Link to comment Share on other sites More sharing options...
Rickynet Posted August 15, 2008 Report Share Posted August 15, 2008 any major bugs, im a tracker administrator i wanna see if this version is fully stable for authorizacion Link to comment Share on other sites More sharing options...
madbishop Posted August 15, 2008 Report Share Posted August 15, 2008 Maybe a pictoral example will help.Here's a sketch-up of what my status table looks like right now:Name # Size Done Status Seeds Peers Down Speed Up Speed ETAFile1 * 257MB 100% Seeding 0(50) 0(0) (inf)File2 * 329MB 100% Seeding 0(17) 0(0) (inf)File3 * 286MB 100% Seeding 0(12) 0(0) (inf)File4 * 312MB 100% Seeding 0(10) 2(1) 29.4kB/s 5h 6mFile5 1 614MB 86% Queued 0(2) 0(4)File6 2 700MB 29% Queued 0(3) 0(5)...If I have queue.dont_count_slow_dl set true, queue.dont_count_slow_ul set true, queue.slow_dl_threshold and queue.slow_ul_threshold at 1000, shouldn't it be trying to download those two queued files if I have max number of active torrents set to 3?I have "Seeding tasks have higher priority than downloading tasks" checked, because otherwise it appears to want to download all of the queued files before it starts seeding any of them.This is behavior I saw in previous versions as well; it just doesn't make sense that seeds that are not uploading will still block potential downloads from starting. Link to comment Share on other sites More sharing options...
Firon Posted August 15, 2008 Author Report Share Posted August 15, 2008 any major bugs, im a tracker administrator i wanna see if this version is fully stable for authorizacionNothing major no. A few UI glitches but that's about it. Nothing worth releasing a new quick update for. Link to comment Share on other sites More sharing options...
thelittlefire Posted August 15, 2008 Report Share Posted August 15, 2008 If you have Queueing settings... AND seeds have higher priority, ALL seeds up to that active amount are running. Lower your seeding torrents Link to comment Share on other sites More sharing options...
stoki Posted August 15, 2008 Report Share Posted August 15, 2008 Firstly I'd like to congratulate you for the new release. Your client is top of the line.I'm just wondering what is the deal with multiple instances of the "add torrent" dialog box. If you open multiple torrents simultaneously you get a bunch of independent windows whereas in the previous release you'd get one window and the destinations would get saved. Now if you have some torrents going to the same destination you have to set the path for each one separately because it doesn't get updated. You could add one torrent at the time and that updates the path but that is painfully slow. It was working fine before why was this altered? Link to comment Share on other sites More sharing options...
Firon Posted August 15, 2008 Author Report Share Posted August 15, 2008 It's always been like that. Link to comment Share on other sites More sharing options...
madbishop Posted August 15, 2008 Report Share Posted August 15, 2008 thelittlefire: Then isn't "queue.dont_count_slow_ul" somewhat useless?The way I see it, I should be able to set up ten DLs, go to work, and not come home to see that it's only downloaded three and then just sat there waiting for those three to find peers -- but if it *does* find peers, it should upload, and not screw up my ratios by insisting on downloading all ten first. Link to comment Share on other sites More sharing options...
thelittlefire Posted August 15, 2008 Report Share Posted August 15, 2008 I don't use "seeding has higher priority"... I don't know if it's a regression or new behavior. Some of the mechanics are counterintuitive with the thresholds... i.e. if a downloading torrent is under the limit it will trigger it, but not if the upload of the downloading torrent is. Link to comment Share on other sites More sharing options...
steve_kap Posted August 15, 2008 Report Share Posted August 15, 2008 Stable, I'll say it is!! Damn thing just sits there, doesn't download any files. I'm using window XP. Any help out there? Link to comment Share on other sites More sharing options...
thelittlefire Posted August 15, 2008 Report Share Posted August 15, 2008 Use the troubleshooting forum. What is your setup? What are their status? Link to comment Share on other sites More sharing options...
rafi Posted August 15, 2008 Report Share Posted August 15, 2008 probably forgot to re-define it in his firewall ... It happens to me all the time, my firewall "forgets" to ask me what to do with this new install/exe, until after I reboot my PC... I always wondered why ? ... Link to comment Share on other sites More sharing options...
Ryan Norton Posted August 15, 2008 Report Share Posted August 15, 2008 I'm just wondering what is the deal with multiple instances of the "add torrent" dialog box. If you open multiple torrents simultaneously you get a bunch of independent windows whereas in the previous release you'd get one window and the destinations would get saved. Now if you have some torrents going to the same destination you have to set the path for each one separately because it doesn't get updated. You could add one torrent at the time and that updates the path but that is painfully slow. It was working fine before why was this altered?This was part of the change to move all dialogs to be non-modal so you could change torrent settings and such while adding torrents through the GUI. Other dialogs were also changed to be this way in 1.8 as well.Now, the thing you mention about the destination getting saved is a good point and sort of a trade-off currently - it should still do so but not for ones already open. In the future I'm planning on adding batch capability to the dialog so you can choose where to save any number of selected torrents from just one add torrent dialog, but I'm not 100% sure how to approach that quite yet.Please feel free to mention any suggestions if you have any. Link to comment Share on other sites More sharing options...
GTHK Posted August 15, 2008 Report Share Posted August 15, 2008 Few random ideas: A button to copy paths and/or labels to other dialogs? Same with queue settings? Or maybe a dialog that let's you pick destination, label, etc., and has a box at the bottom were you can add as many .torrents as you like to be added with those options? And eventually allowing file selection/prioritiation from that dialog (each .torrent gets a tree view under its name ).OH! How did the webseeding bug go? Where multiple URL's could be added and downloading would work, except for cross file pieces, which would hash wrong and cause the server to be banned. alus told me it's difficult and that he'd try to work something out, and I suggested that if it can't be fixed easily that cross file pieces be avoided so that there's at least partial support. Link to comment Share on other sites More sharing options...
adartis Posted August 15, 2008 Report Share Posted August 15, 2008 thanks to all of you, your team is the No 1 Link to comment Share on other sites More sharing options...
BossDhawan Posted August 15, 2008 Report Share Posted August 15, 2008 congratulation .... thanx utorrent Team .. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.