SkyHi Posted April 25, 2010 Report Share Posted April 25, 2010 Even more, I think that there shouldn't be available at all, an option in the settings that can cause trouble. At least until it is fixed. Link to comment Share on other sites More sharing options...
Switeck Posted April 25, 2010 Report Share Posted April 25, 2010 3/4 of the advanced settings and even much of the speed settings can "cause trouble" if set wrong for your line/network.If I recall correctly, upgrading uTorrent v1.8.x to v2.x automatically changed bt.trans_disposition even if you manually changed that setting before.So why not Disk Cache settings?Disabling "reduce memory usage" (2nd checkbox) would seem a smart choice as well, if windows caching is disabled. uTorrent should still limit its disk cache to 32 MB. Link to comment Share on other sites More sharing options...
Ondoy Posted April 27, 2010 Report Share Posted April 27, 2010 It's crash when adding torrent while utorrent not open. Link to comment Share on other sites More sharing options...
Armathendae Posted April 27, 2010 Report Share Posted April 27, 2010 Hi there, first I wanted to thank you all for the wonderful work you do with utorrent. But the last release(2.0.1) was a very bitter pill to swallow. The down and upload rate were very low 60KB/s tops(all running torrents together) after a rollback to 2.0 I'm easily getting 1.2MB/s ..... just saying. I'm not a crack so my report is certainly laking.... I'm running Windows 7 64bit. hope the next release fixes my problem Link to comment Share on other sites More sharing options...
moogly Posted April 27, 2010 Report Share Posted April 27, 2010 @Ondoy: what has crashed? OS, µT?Do you have some crashdumps in the folder %appdata%\utorrent?If yes, upload them to http://www.mediafire.com/ Link to comment Share on other sites More sharing options...
painter75 Posted April 27, 2010 Report Share Posted April 27, 2010 I confirm: the utorrent is VERY slow. Not only in speed, but even more so in interface responsibility.When downloading the package, my F-Secure also points to the Chrome-browser cache and tells about the contamination by this: http://www.f-secure.com/v-descs/trojan_w32_generic.shtmlEdit: tested and can confirm that uTorrent 2.0.1. build 19078 works just fine. Therefore the problem must be somewhere in the last build. Link to comment Share on other sites More sharing options...
seed.helper Posted April 27, 2010 Report Share Posted April 27, 2010 the last build dont show any peers on the peers tab when a torrent is active and seding or receiving data.... never appear anything basicaly in the peers tabcheers Link to comment Share on other sites More sharing options...
Ondoy Posted April 27, 2010 Report Share Posted April 27, 2010 @mooglyIt's white only utorrent window and not responding I must end task and re-open utorrent.It's have not dump file.I will test again.Sorry I'm not strong in English, next time I will come with picture. ^^Windows 7 Ultimate (x86) (6.1.7600)Pentium Dual Core E63002GBAdminThank you. Link to comment Share on other sites More sharing options...
schnurlos Posted April 27, 2010 Report Share Posted April 27, 2010 @seed.helperYou're sure that you have an active up-/downloading torrent highlighted while looking on peers tab? Link to comment Share on other sites More sharing options...
seed.helper Posted April 27, 2010 Report Share Posted April 27, 2010 yes im sure schnurlos i have two computers with the same versionin one works and in other dont... i have deleted all the configurations in the application data and still doesnt work Link to comment Share on other sites More sharing options...
rafi Posted April 27, 2010 Report Share Posted April 27, 2010 @Ondoy - make sure both your advanced->cache->read & write windows caching are disabled (checked) @seed.helper - so it's only 50% defective ... maybe you can give more details on your PCs configuration if you want a serious answer... and I suggest you try fix your AV + firewall on the "defective" PC to recognize the new version... @painter75 - maybe... try and disable the speed graph legend@Armathendae - try icreasing the upload limit so to better take your overhead into account Link to comment Share on other sites More sharing options...
moogly Posted April 27, 2010 Report Share Posted April 27, 2010 @Ondoy: or a third-party program is injected into utorrent.exe and your client is crashing/hanging.Can you post Hijackthis and Process Explorer when µT is running.Guide: http://forum.utorrent.com/viewtopic.php?id=29748Anyway can you open a new thread about your issuein this section (http://forum.utorrent.com/viewforum.php?id=3), thanks. Link to comment Share on other sites More sharing options...
seed.helper Posted April 27, 2010 Report Share Posted April 27, 2010 what new version ??the program says that its not available new versionthe pc specs are herehttp://www.mediafire.com/?rmmiy4mzzkjcourtesy of everest lol Link to comment Share on other sites More sharing options...
rafi Posted April 27, 2010 Report Share Posted April 27, 2010 old = 2.0 new = 2.01 . AV & Firewall should be adjusted . Does Everst say if it's X64 ? anyways - disable Win cache... Link to comment Share on other sites More sharing options...
seed.helper Posted April 27, 2010 Report Share Posted April 27, 2010 ???? Link to comment Share on other sites More sharing options...
DreadWingKnight Posted April 27, 2010 Report Share Posted April 27, 2010 Reset your column header on the peers tab. Link to comment Share on other sites More sharing options...
seed.helper Posted April 27, 2010 Report Share Posted April 27, 2010 how do i do that? Link to comment Share on other sites More sharing options...
DreadWingKnight Posted April 27, 2010 Report Share Posted April 27, 2010 Right-click where the column headers would be and click "reset columns" Link to comment Share on other sites More sharing options...
seed.helper Posted April 27, 2010 Report Share Posted April 27, 2010 thanks that solved my problemdidnt know thatwhat happened? Link to comment Share on other sites More sharing options...
Zafila Posted April 27, 2010 Report Share Posted April 27, 2010 This new version the speed sure is very slow, with just 1 torrent on the speed hardly pass 100kb/s. I gonne back to 2.0 and I'm getting speeds of 1 mb/s very easy. :/ Link to comment Share on other sites More sharing options...
Anonymous1 Posted April 27, 2010 Report Share Posted April 27, 2010 @ Zafila - redo a uT settings by testing connection one more time and save the new proposed settings, cause uT 2.0.1 contain also overhead limit enabled by default... Link to comment Share on other sites More sharing options...
Firon Posted April 27, 2010 Author Report Share Posted April 27, 2010 Raise your upload cap. µTorrent calculates overhead and tries to ensure you stay there, even if it means throttling other traffic. So downloading generates upload overhead, and if you cap your upload very low, it will throttle download until the total upload including overhead is at the cap.This also means that it shows you values closer to the theoretical amount of bandwidth your connection has. Link to comment Share on other sites More sharing options...
rafi Posted April 28, 2010 Report Share Posted April 28, 2010 since force-changing this setup (and I believe - for a better one) does effect some users that way, - why don't you just display a first-run readme/message for 2.01 up-graders to take care of re-adjusting their speed limits if required ? Link to comment Share on other sites More sharing options...
painter75 Posted April 28, 2010 Report Share Posted April 28, 2010 @rafi - maybe... try and disable the speed graph legendI am not sure it will help nor that I were even able to do this (like I said, the interface was SLOW, so slow that buttons didn't even respond correctly). Anyways, I won't test this suggestion since I am back to the older version and I am very happy with it. Link to comment Share on other sites More sharing options...
DreadWingKnight Posted April 28, 2010 Report Share Posted April 28, 2010 Downgrading isn't troubleshooting and doesn't actually solve the problem at hand.preferences - advanced - gui.graph_legendset to false. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.